Publications
Mensching, N.; Krüger, M.L.; Kvaratskheliya, A.; Meyer, D.; Tracht, K.; Okulov, I.V.; M?dler, L. Dry Adhesive Microstructures for Material Handling of Additively Manufactured and Deep Rolled Metal Surfaces with Reference to Mars. Preprints.org 2023, 2023041169. https://doi.org/10.20944/preprints202304.1169.v1
Rückert, P.; Tracht,K.: Mutualistic networks for decentralized task allocation in human-robot teams, CARV 2023, accepted
Zhang, J.; Zei?ig, M.; D?rfert, R.; Jablonski, F.; Kienzler, R.; Schumacher, J.; Clausen, B.; Woizeschke, P.; Vollertsen, F.: Influence of laser beam scanning pattern and polar angle on the fatigue behavior of additively manufactured specimens made of steel 316L. Materials Science and Engineering: A, In Press (2023). https://doi.org/10.1016/j.msea.2023.145651
Zei?ig, M.; Jablonski, F.: Numerical investigation of production-related characteristics regarding their influence on the fatigue strength of additively manufactured components. acta mechanica et automatica - Special Issue "Modeling and experimental investigations of thermo-hydraulic, hydrogen, manufacturing and mechanical system", vol.17 no.2 (2023). https://doi.org/10.2478/ama-2023-0033
Meyer-Coors, M.; Kienzler, R.; Schneider, P.: A mathematically rigorous proof on the decoupling of the plate and disc problem.Acta Mech (2023). https://doi.org/10.1007/s00707-023-03498-2
Kracht, K.; Meyer-Coors, M.; Schr?der, R.: From "How to Model a Painting" to the Digital Twin Design of Canvas Paintings.Journal of Engineering Management and Systems Engineering (2023). https://doi.org/10.56578/jemse020101
Nassef, M.; Mostafa, T.; Schenck, C.: Model Optimization of Kinematic Redundant Feed Drive Systems Using Sailfish Optimization AlgorithmInternational Journal of Mechanical Engineering and Robotics Research Vol. 11, No. 3, March 2022, S. 187-191 http://www.ijmerr.com/index.php?m=content&c=index&a=show&catid=207&id=1714
Beckschwarte, B.; Heidhoff, J.; Langst?dtler, L.; Schenck, C.; Riemer, O.; Kuhfuss, B.: Impact of die coatings on forming conditions in electromagnetic embossing of thin sheet metal Esaform 2022, 25th International Conference on Material Forming, 27-29 April, 2022, Braga/Portugal
Beckschwarte, B.; Langst?dtler, L.; Schenck, C.; Herrmann, M.; Kuhfuss, B.: Numerical and Experimental Investigation of the Impact of the Electromagnetic Properties of the Die Materials in Electromagnetic Forming of Thin Sheet Metal Impulse-Based Manufacturing Technologies, Editor V. Psyk, Journal of Manufacturing and Materials Processing, 2022, S. 127-140 ISBN 978-3-0365-2891-5; https://doi.org/10.3390/books978-3-0365-2891-5
Meiners, F.; Tuitje, C.; Hogreve, S.; Tracht, K.: Model-based prediction of the detachment of microspheres from dry-adhesive gripper surfaces by bending. Procedia CIRP 115 (2022) 101-106.
10.1016/j.procir.2022.10.057
Rückert, P.; Khabipova, A.; Tracht, K.: Development of a sustainability strategy for fuel cells using life cycle analysis and expert interviews, CIRP GCSM 22, (in print)
Rueckert, P.; Wallmeier, H.; Tracht, K: Biofeedback for human-robot interaction in the context of collaborative assembly, 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering - CIRP ICME '22 Virtual Conference, 13-15 July, Procedia CIRP, Elsevier, ISSN: 2212-8271, (in print)
Sievers, T.; Ewers, J.; Heine, J.; Kuschel, N.; Marhenke, L.; Sindlinger, M.; Wassermann, N.; Tracht, K.: Soundscape Generation for Virtual Human Robot Collaboration. Procedia CIRP 107 (2022) 1005-1010.
DOI: 10.1016/j.procir.2022.05.099
Hogreve, S.; Wallmeier; H.; Tracht, K.: Evaluation of the Ergonomic Potential of Adaptive Assembly Jigs for Large-Scale Products Using Human Modelling. In: Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2022. Hrsg.: T. Schüppstuhl et al., Springer Cham (2022). (in print)
Papenberg, B.; Hogreve, S.; Tracht, K.: Experimental spaces for the introduction of disruptive technologies in production. In: 11th International Conference on Through- life Engineering Services – TESConf 2022, 8.–9.11.2022, Cranfield (2022) Paper Nr. 4264.
Papenberg, B.; Hogreve, S.; Tracht, K.: Classification of tool wear on milling tools using methods of machine learning based on visual sensor data , 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering - CIRP ICME '22 Virtual Conference, 13-15 July, Procedia CIRP, Elsevier, ISSN: 2212-8271, (in print)
Zei?ig, M.; Jablonski, F.: Numerical investigation of production-related characteristics regarding their influence on the fatigue strength of additively manufactured components. XXV International Symposium: Research – Education – Technology, Bremen, 30. Juni 2022, Conference Proceedings, 199-203.
Zei?ig, M.; Jablonski, F.: Comparison of different approaches to model fatigue for additively manufactured specimens considering production-related characteristics. Procedia Structural Integrity, 38 (2022), 60-69. https://doi.org/10.1016/j.prostr.2022.03.007
Schreiber, P.; Hochbein, J.; Bergmann, B.; Schenck, C.; Kuhfuss, B.; Denkena, B.: Ultra Precision High Performance Axis Control In: Ultra-precision High Performance Cutting, Report of DFG Research Unit FOR 1845, Hrsg.: Brinksmeier, E.; Sch?nemann, L., Springer Verlag, S. 147-170 (2021) ISBN 978-3-030-83764-8; DOI: 10.1007/978-3-030-83765-5_6
D?rgeloh, T.; Parsa, N.; Schenck, C.; Riemer, O.; Brinksmeier, E.; Kuhfuss, B.: Spindle Balancing for Ultra-Precision High Speed Cutting In: Ultra-precision High Performance Cutting, Report of DFG Research Unit FOR 1845, Hrsg.: Brinksmeier, E.; Sch?nemann, L., Springer Verlag, S. 107-146 (2021) ISBN 978-3-030-83764-8; DOI: 10.1007/978-3-030-83765-5_5
Charni, D.; Ortmann-Ishkina, S.;Herrmann, M.; Schenck, C.; Epp, J.: Mechanical properties of rotary swaged steel components Forschung im Ingenieurwesen (2021) https://doi.org/10.1007/s10010-021-00498-3
Odening, D.;Rauschnabel, E.;Kuhfu?, B.: Werkzeugkonzept und Verfahren zum partiellen und inkrementellen Umformen durch Elektrohydroumformung Deutsches Patent- und Markenamt,AZ DE: 10 2018 008 672.1 https://register.dpma.de/DPMAregister/pat/register?AKZ=1020180086721&CURSOR=6
Heidhoff, J.; Beckschwarte, B.; Riemer, O.; Sch?nemann, L.; Herrmann, M.; Schenck, C.; Kuhfu?, B.: Electromagnetic Embossing of Optical Microstructures with High Aspect Ratios in Thin Aluminum Sheets 24th International Conference on Material Forming (ESAFORM 2021), ULiège 14-16 April 2021 https://popups.uliege.be/esaform21/index.php?id=4337
Ortmann-Ishkina, S; Charni, D; Herrmann, M.; Liu, Y.; Epp, J.; Schenck, C; Kuhfu?, B.: Development of residual stresses by infeed rotary swaging of steel tubes Archive of Applied Mechanics (2021) https://doi.org/10.1007/s00419-021-01905-5
Franceschi, A.; Stahl, J.; Kock, C.; Selbmann, R.; Ortmann-Ishkina, S.; Jobst, A.; Merklein, M.; Kuhfu?, B.; Bergmann, M.; Behrens, B.-A.; Volk, W.; Groche, P: Strategies for residual stress adjustment in bulk metal forming Archive of Applied Mechanics (2021) https://link.springer.com/article/10.1007/s00419-021-01903-7?wt_mc=Internal.Event.1.SEM.ArticleAuthorOnlineFirst&utm_source=ArticleAuthorOnlineFirst&utm_medium=email&utm_content=AA_en_06082018&ArticleAuthorOnlineFirst_20210226
Charni, D.; Ishkina, S.; Epp, J.; Herrmann, M.; Schenck, C.; Kuhfu?, B.: Complementary methods for assessment of residual stress fields induced by rotary swaging of steel bars 13th International Conference on the Technology of Plasticity (ICTP 2021), July 25-30, 2021, The Ohio State University, Ohio doi: 10.1007/978-3-030-75381-8_188
Beckschwarte, B.; Herrmann, M.; Schenck, C.; Kuhfu?, B.: Determination of Plastic Material Properties of Thin Metal Sheets under Electromagnetic Forming Conditions 24th International Conference on Material Forming (ESAFORM 2021), ULiège 14-16 April 2021 https://popups.uliege.be/esaform21/index.php?id=850
B?sing, I.; Ortmann-Ishkina, S.; Herrmann, M; Schenck, C.; Kuhfu?, B.; Baune, M.: Control of corrosion features by forming parameters 24th International Conference on Material Forming (ESAFORM 2021), ULiège 14-16 April 2021, doi: 10.25518/esaform21.1464https://popups.uliege.be/esaform21/index.php?id=1464
Langst?dtler, L.; Intemann, A. P.; Pegel, H. Herrmann, M.; Schenck, C.; Kuhfu?, B.: Rapid Tooling for Impulse Forming 24th International Conference on Material Forming (ESAFORM 2021), ULiège 14-16 April 2021 https://popups.uliege.be/esaform21/index.php?id=2483
Langst?dtler, L.; Herrmann, M.; Schenck, C.; Kuhfu?, B.: Joining of Sheets and Tubes by Electrohydraulic Forming 24th International Conference on Material Forming (ESAFORM 2021), ULiège 14-16 April 2021 https://popups.uliege.be/esaform21/index.php?id=867
Beckschwarte, B.; Langst?dtler, L.; Schenck, C.; Herrmann, M.; Kuhfu?, B.: Numerical and Experimental Investigation of the Impact of the Electromagnetic Properties of the Die Materials in Electromagnetic Forming of Thin Sheet Metal J. Manuf. Mater. Process. 2021, 5(1), 18 https://doi.org/10.3390/jmmp50100
Langst?dtler, L.; Schnabel, S.; Herrmann, M.; Schenck, C.; Kuhfu?, B.: Short-Term Material Characterization by Electrohydraulic Incremental Extrusion through Micro Channels Materials2021, 14(3), 525 https://doi.org/10.3390/ma14030525
Liu, Y.; Liu, J.; Herrmann, M.; Schenck, C.; Kuhfu?, B.: Material Flow in Infeed Rotary Swaging of Tubes Materials 2021, 14 (1), 58 https://doi.org/10.3390/ma14010058
Papenberg, B; Hogreve, S.: Künstliche Intelligenz zum Anfassen, Industrial Production 12(2021) 47-47
Papenberg, B., Rückert, P., Tracht, K. (2022). Classification of Assembly Operations Using Recurrent Neural Networks. In: Schüppstuhl, T., Tracht, K., Raatz, A. (eds) Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2021. Springer, Cham. https://doi.org/10.1007/978-3-030-74032-0_25
Sievers, T.; Neumann, F.; Tracht, K.: Augmented Virtuality in a Digital Learning Factory for Collaborative Robotics. Proceedings of the Conference on Learning Factories (CLF) 2021
DOI: 10.2139/ssrn.3858350
Rückert, P.; Papenberg, P.; Sievers, T.; Tracht, K.: On-site learning factories for implementing artificial intelligence systems in production. Proceedings of the Conference on Learning Factories (CLF) 2021
DOI: dx.doi.org/10.2139/ssrn.3864445
Hogreve, S.; Krist, K., Tracht, K.: Mobile, Modular and Adaptive Assembly Jigs for Large-Scale Products. In: Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2021. Hrsg.: T. Schüppstuhl, K. Tracht, A. Raatz, Springer Cham (2022) 39–50.
Meyer-Coors, M.; Kienzler, R.; Schneider, P.: Plate theories: A‐priori fulfillment of the local conditions by the consistent‐approximation approach. Proc. Appl. Math. Mech. 21 (1). https://doi.org/10.1002/pamm.202100136
Meyer-Coors, M.; Kienzler, R.; Schneider, P.: Modularity of the displacement coefficients and complete plate theories in the framework of the consistent-approximation approach. Continuum Mech. Thermodyn., 33 (2021), 1805-1827. https://doi.org/10.1007/s00161-021-01009-z
Zei?ig, M.; Jablonski, F.: Berücksichtigung fertigungsbedingter Eigenschaften bei der Beschreibung der Schwingfestigkeit von SLM-Proben. 53. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit, online, 18. - 19. Februar 2021. https://doi.org/10.48447/Br-2021-020
Meyer-Coors, M.; Kienzler, R.; Schneider, P.: Plate theories: A mixed Vekua and consistent approximation approach. Proc. Appl. Math. Mech., 20 (1). https://doi.org/10.1002/pamm.202000124
Kashtalyan, M.; Kienzler, R.; Meyer-Coors, M.: Development of the consistent second-order plate theory for transversely isotropic plates and ist analytical assessment from the three-dimensional perspective. Thin-walled Structures, 163 (2021). https://doi.org/10.1016/j.tws.2021.107704
Heppner, E.; Glüge, R.; Weber, M.; Woschke, E.: Framework for modelling the elastoplastic behaviour of friction welded lightweight structures under tension. Proc. Appl. Math. Mech., 20. https://doi.org/10.1002/pamm.202000262
Glüge, R.; Altenbach, H.; Eisentr?ger, S.: Locally-synchronous, iterative solver for Fourier-based homogenization. Computational Mechanics, 68 (2021), 599-618. https://doi.org/10.1007/s00466-021-01975-w
Glüge, R.; A?mus, M.: A systematic approach to reduce the independent tensor components by symmetry transformations - A commented translation of "Tensors and Crystal Symmetry" by Carl Hermann. Continuum Mechanics and Thermodynamics, 33 (2021), 1603-1620. https://doi.org/10.1007/s00161-021-00978-5
Nazarenko, L.; Glüge, R.; Altenbach, H.: Inverse Hooke’s law and complementary strain energy in coupled strain gradient elasticity. Zeitschrift für Angewandte Mathematik und Mechanik, 101 (9). https://doi.org/10.1002/zamm.202100005
Nazarenko, L.; Glüge, R.; Altenbach, H.: Positive definiteness in coupled strain gradient elasticity. Continuum Mech. Thermodyn, 33 (2021), 713-725, Springer, https://doi.org/10.1007/s00161-020-00949-2
Glüge, R.: Homogenisierungsmethoden: Effektive Eigenschaften von Kompositen. ISBN 9783110719482, De Gruyter STEM 2021
Herrmann, M.; Beckschwarte, B.; Hasselbruch, H.; Heidhoff, J.; Schenck, C.; Riemer, O.; Mehner, A.; Kuhfu?, B. : Diamond-Like-Carbon Coated Dies for Electromagnetic Embossing Materials 2020,13, 4939; doi:10.3390/ma13214939 https://www.mdpi.com/1996-1944/13/21/4939
Hasselbruch, H.; Herrmann, M.; Heidhoff, J. ; B?hmermann, F.; Riemer, O.; Mehner, A.; Kuhfu?, B. : Potentials of Dry Rotary Swaging Dry Metal Forming OAJ FMT 6 (2020) 192–227https://media.suub.uni-bremen.de/bitstream/elib/4373/3/DMFOAJ_6_2020_192-227_Hasselbruch.pdf
Langst?dtler, L. : Elektromagnetisches und elektrohydraulisches Impulsumformen in der Mikroproduktion Dissertation Dr.-Ing., Universit?t Bremen https://doi.org/10.26092/elib/356
Bacic, I.; Rodenhauser, A. Kuhfuss, B.; Colombi Ciacchi, L. : Forschendes Lernen im Masterstudiengang Systems Engineering - Bausteine erhalten, Bausteine zusammensetzen, Ergebnisse reflektieren in Forschendes Lernen als Studiengangsprofil, Hrsg. Hoffmeister, T.; Koch, H.; Tremp, P., S. 285-300 Verlag Springer GmbH (ISBN 978-3-658-28824-2) https://doi.org/10.1007/978-3-658-28825-9
Alexe, G.; Tausendfreund, A.; St?bener, D.; Langst?dtler, L.; Herrmann, M.; Schenck, C., Fischer, A. : Uncertainty and resolution of speckle photography on micro samples Nanomanufacturing and Metrology volume 3,pages 91–104 (2020) https://link.springer.com/article/10.1007/s41871-020-00059-2
St?bener, D.; Alexe, G.; Langst?dtler, L.; Herrmann, M.; Schenck, C.; Fischer, A. : An optical method to determine the strain field on micro samples during electrohydraulic formingProcedia CIRP Volume 87, 2020, Pages 438-443https://doi.org/10.1016/j.procir.2020.02.099
Herrmann, M.; Schenck, C.; Leopold, H.; Kuhfuss, B. : Material improvement of mild Steel S355J2C by hot rotary Swaging ESAFORM 2020, 23rd International Conference on Material Forming, 4th - 6th May, 2020, Cottbus Procedia Manufacturing 47 (2020) 282–287 https://www.sciencedirect.com/science/article/pii/S2351978920312907
Ishkina, S.; Schenck, C.; Herrmann, M.; Kuhfu?, B.: Visualization of Axial Material Flow by Eccentric Thread Swaging ESAFORM 2020, 23rd International Conference on Material Forming, 4th - 6th May, 2020, Cottbus Procedia Manufacturing 47 (2020) 1339–1344 https://doi.org/10.1016/j.promfg.2020.04.255
Sch?nemann, L.; Berger, D.; D?rgeloh, T.; Riemer, O.; Brinksmeier, E.; Krüger R.; Schreiber, P.; Denkena, B.; Hochbein, J.; Parsa, N.; Schenck, K.; Kuhfu?, B. : Synergistic Approaches to Ultra-precision High Performance Cutting CIRP Journal of Manufacturing Science and Technology, Volume 28 (2020), 38-51 https://doi.org/10.1016/j.cirpj.2019.12.001
Sievers, T.: MRK in der Aus- und Weiterbildung - Virtuelle Schulung für die Mensch-Roboter-Kollaboration. Handling, 6(2020) 28-29.
Sievers, T.; Schmitt, B.; Petersen, M.; Tracht, K.: Integration of Collaborative Robotics in Vocational Training Using Mixed Reality. Annals of Scientific Society for Assembly, Handling and Industrial Robotics, ed.: T. Schüppstuhl; K. Tracht; D. Hinrich. Springer Vieweg, Berlin (2020) 275-283.
DOI: 10.1007/978-3-662-61755-7_25
Rückert, P.; Papenberg, B.; Tracht, K.: Classification of assembly operations using machine learning algorithms based on visual sensor data
Onken, A.-K.; Schiemenz, A.; Bader, A.; Tracht, K.: Robustness as Enabler for Sustainable Production Networks. Procedia CIRP 93 (2020) 759-764. https://doi.org/10.1016/j.procir.2020.03.059.
Meiners, F.; Tracht, K.: Releasing principles for dry-adhesive handling of microobjects. Procedia CIRP 91 (2020) 503–507. 10.1016/j.procir.2020.02.206.
Hogreve, S.; Prigge, M.; K?bisch, K. O.; Tracht, K.: Encapsulation of sensory gripper fingers with silicone rubber. Procedia CIRP 91 (2020) 439–444. 10.1016/j.procir.2020.02.196
Bader, A.; Onken, A.-K.; Tracht, K.: Planning of Structural Dynamic Production Systems with High Variation of Products, in 2020 7th International Conference on Control, Decision and Information Technologies (CoDIT), Prague, Czech Republic, Jun. 2020 - Jul. 2020, 874–879. 10.1109/CoDIT49905.2020.9263801
Bader, Alexander; Onken, Ann-Kathrin; Tracht, Kirsten: Conceptual Approach of Robustness in Logistical Control. In: Nyhuis, P.; Herberger, D.; Hübner, M. (Eds.): Proceedings of the 1st Conference on Production Systems and Logistics (CPSL 2020), 2020, 353-359. DOI: https://doi.org/10.15488/9677
Bader, A; Kaufmann, J.; Tracht, K.: Order Classification in Inventory Planning of Job Shop Production. Procedia Manufacturing, 49 (2020) 180-184.
Bader, A; Kipry, N.; L?gers, F.; Tracht, K.: Algorithm for High-Throughput Scheduling of Paced Sequences. Procedia Manufacturing, 43 (2020) 223-230.
Kienzler, R.; Kashtalyan, M.: Assessment of the consistent second-order plate theory for isotropic plates from the perspective of the three-dimensional theory of elasticity. International Journal of Solids and Structures, 185–186 (2020), 257-271. https://doi.org/10.1016/j.ijsolstr.2019.08.035
Kienzler, R.; Schneider, P.: Uniform-approximation approach vs. Vekua-type approximation.Mechanics of Materials: Towards Predictive Methods for Kinetics in Plasticity, Fracture and Damage. Report No. 17/2020. Oberwolfach Reports 17 (2020), 740-741. https://doi.org/10.14760/OWR-2020-13
Meyer-Coors, M.; Kienzler, R.; Schneider, P.: Plate Theories: A mixed Vekua and consistent-approximation approach. Mechanics of Materials: Towards Predictive Methods for Kinetics in Plasticity, Fracture and Damage. Report No. 13/2020, Oberwolfach Reports 14 (2020), 753-754. https://doi.org/10.14760/OWR-2020-13
Zei?ig, M.; Jablonski, F.: Rechnerische Beschreibung der Schwingfestigkeit von SLM-Proben unter Berücksichtigung fertigungsbedingter Defekte. 52. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit, Hamburg, 18. - 19. Februar 2020
Altenbach, H.; Chinchaladze, N.; Kienzler, R.; Müller, W. H. (Eds.): Analysis of Shells, Plates, and Beams - A State of the Art Report.Advanced Structural Mechanics, 134 (2020), Springer.
Andresen, S.; Lottes, L. M.; Linnemann, S. K., Kienzler, R.: Shape adaptation of beams (1D) and plates (2D) to maximise eigenfrequencies. Advances in Mechanical Engineering, 12 (2020), 1-18. https://doi.org/10.1177/1687814020971903
Weber, M.; Glüge, R.; Altenbach, H.: Evolution of the stiffness tetrad in fiber-reinforced materials under large plastic strain. Archive of Applied Materials, 91 (2021), 1371-1390, Springer. https://doi.org/10.1007/s00419-020-01827-8.
Glüge, R.; Altenbach, H.; Mahmood, N. et al.: On the Difference Between the Tensile Stiffness of Bulk and Slice Samples of Microstructured Materials. Applied Composite Materials, 27 (2020), 969-988, Springer. https://doi.org/10.1007/s10443-020-09833-3.
Schneider, P.; Kienzler, R.: Dimensioning of Thick-walled Sperical and Cylindrical Pressure Vessels. Mathematics and Mechanics of Solids, 25 (2020), 1405 - 1415. https://doi.org/10.1177/1081286517713243
Schneider, P.; Kienzler, R.: A priori estimation of the systematic error of consistently derived theories for thin structures. International Journal of Solids and Structures, 190 (2020), 1-21. https://doi.org/10.1016/j.ijsolstr.2019.10.010
Langenfeld, K.; Schowtjak, A.; Schulte, R.; Hering, O.; M?hring, K.; Clausmeyer, T.; Ostwald, R.; Walther, F.; Tekkaya, A.E.; Mosler, J.: Influence of anisotropic damage evolution on cold forging, Prod. Eng. Res. Devel., 14 (2020), 115–121. https://doi.org/10.1007/s11740-019-00942-y
Steinbacher; M.; Alexe, G.; Baune, M.; Bobrov, I.; B?sing, I.; Clausen, B.; Czotscher, T.; Epp, J.; Fischer, A.; Langst?dtler, L.; Meyer, D.; Menon, S.; Riemer, O.; Sonnenberg, H.; Thomann, A.; T?njes, A.; Vollertsen F.; Wielki, N.; Ellendt, N : Descriptors for high throughput in structural materials development MDPI Journal: high-throughput, MDPI Journal: high-throughput, 2019, 8, 22; doi:10.3390/ht8040022, https://www.mdpi.com/journal/highthroughput
Hasselbruch, H.; Herrmann, M.; Heidhoff, J. ; Zoch, H. W.; Kuhfu?, B.; Riemer, O.; Mehner, A.: Strukturierte und DUPLEX behandelte Werkzeuge für die Trockenbearbeitung beim Rundkneten Dry Met. Forming OAJ FMT 5 (2019) 031–038, https://www.trockenumformen.de/app/download/10203171/5_DMFOAJ_52019_Hasselbruch_IWT+Bremen_031-038.pdf
Wilhelmi, P.; Onken, A.-K.; Schenck, C.; Kuhfu?, B.; Tracht, K. :
Linked Parts for Micro Cold Forming Process Chains Cold Micro Metal Forming Research Report of Collaborative Research Center "Micro Cold Forming" (SFB 747), Bremen, Hrsg.: Vollertsen, F., Friedrich, S., Kuhfu?, B., Maa?, P., Thomy, C., Zoch, H., Springer Verlag, 2019, S. 98-114, ISBN 978-3-030-11280-6, https://www.springer.com/de/book/9783030112790?utm_campaign=3_pier05_buy_print&utm_content=en_08082017&utm_medium=referral&utm_source=google_books#otherversion=9783030112806https://link.springer.com/content/pdf/10.1007%2F978-3-030-11280-6.pdf
Ishkina, S.; Schenck, C.; Kuhfu?, B. :Conditioning of Part PropertiesCold Micro Metal Forming Research Report of Collaborative Research Center "Micro Cold Forming" (SFB 747), Bremen, Hrsg.: Vollertsen, F., Friedrich, S., Kuhfu?, B., Maa?, P., Thomy, C., Zoch, H., Springer Verlag, 2019, S. 63-72, ISBN 978-3-030-11280-6, https://www.springer.com/de/book/9783030112790?utm_campaign=3_pier05_buy_print&utm_content=en_08082017&utm_medium=referral&utm_source=google_books#otherversion=9783030112806https://link.springer.com/content/pdf/10.1007%2F978-3-030-11280-6.pdf
Moumi, E.; Schenck, C.; Herrmann, M. Kuhfu?, B. : Rotary Swaging of Micro Parts Cold Micro Metal Forming Research Report of Collaborative Research Center "Micro Cold Forming" (SFB 747), Bremen, Hrsg.: Vollertsen, F., Friedrich, S., Kuhfu?, B., Maa?, P., Thomy, C., Zoch, H., Springer Verlag, 2019, S. 45-62, ISBN 978-3-030-11280-6, https://www.springer.com/de/book/9783030112790?utm_campaign=3_pier05_buy_print&utm_content=en_08082017&utm_medium=referral&utm_source=google_books#otherversion=9783030112806https://link.springer.com/content/pdf/10.1007%2F978-3-030-11280-6.pdf
Herrmann, M. Schmierstofffreies Rundkneten/TrockenrundknetenDissertation Dr.-Ing., Universit?t Bremen https://elib.suub.uni-bremen.de/edocs/00107442-1.pdf
Moumi, E.: Untersuchungen zum Rundkneten von Mikrobauteilen Dissertation Dr.-Ing., Universit?t Bremen http://nbn-resolving.de/urn:nbn:de:gbv:46-00107135-13
Ishkina, S.; Toenjes, A.; Schenck, C.; von Hehl, A.; Zoch, H.-W.; Kuhfu?, B : Eccentric rotary swaging variants Manufacturing Review 6, 15 (2019) https://mfr.edp-open.org/articles/mfreview/abs/2019/01/mfreview180021/mfreview180021.html
Ishkina, S.; Charni, D.; Herrmann; M.; Liu, Y.; Epp, J.; Schenck, C.; Kuhfu?, B.; Zoch, H.-W.: Influence of process fluctuations on residual stress evolution in rotary swaging of steel tubes Materials 2019, 12, 855; doi:10.3390/ma12060855, Open Access Journal MDPI, Basel https://www.mdpi.com/1996-1944/12/6/855/pdf
Liu, Y.; Herrmann, M.; Schenck, C.; Kuhfu?, B.: Plastic Deformation Components in Mandrel Free Infeed Rotary Swaging of Tubes Procedia Manufacturing, Volume 27, 2019, Pages 33-38, Elsevier Verlaghttps://www.sciencedirect.com/science/article/pii/S2351978918313830
Langst?dtler, L.; Pegel, H.; Beckschwarte, B.; Herrmann, M.; Schenck,C.; Kuhfu?, B.: Flexible tooling for impulse formingProcedia Manufacturing Volume 27, 2019, Pages 130-137, Elsevier Verlag https://doi.org/10.1016/j.promfg.2018.12.055
Krist, K.; Sievers, T.; Onken, A.; Kodjo, Y.; Tracht, K.: Application of Derivative Products for Integrating Expert Knowledge into Assembly Process Planning.
Procedia CIRP, 88 (2020) 88–93. DOI: 10.1016/j.procir.2020.05.016.
Sievers, T.; Goldenstein, C.; Tracht, K.: Material Supply Strategy for Decentralised Assembly Control in Team Assembly. Procedia CIRP, Volume 86, ed.: F. Dietrich; N. Krenkel. Elsevier (2019) 294-299. DOI: 10.1016/j.procir.2020.01.031
Sievers T.; Krist K.; Volf D.; Tracht K.: Feasibility of Mutualistic Networks for Different Types of Assembly Organization. Tagungsband des 4. Kongresses Montage Handhabung Industrieroboter, ed.: T. Schüppstuhl; K. Tracht; J. Ro?mann. Springer Vieweg, Berlin (2019) 158-167. DOI: 10.1007/978-3-662-59317-2_16
Rückert, P.; Münkewarf, S.; Tracht K.: Human-in-the-loop simulation for virtual commissioning of human-robot-collaboration. ICME (2019)
Rückert, P.; Tracht, K.; Wulfsberg, J.: Elementary systems design for urban production and through life engineering services. Procedia Manufacturing (2019)
Rückert, P.; Tracht, K.; Herfs, W.; Roggendorf, R.; Schubert, V.; Schneider, M.: Consolidation of product lifecycle information within human-robot
collaboration for assembly of multi-variant products. Tesconf (2019) (accepted for publication)
Rückert, P.; Tracht, K.; Wünsch, G.; Schwarz, P.: Virtuelle Erprobung kollaborativer Montagesysteme. In: Projektatlas Kompetenz Montage - Kollaborativ und Wandlungsf?hig (2019), 76-77
Herfs, W.; Storms, S.; Roggendorf, S.; Petrovic, O.; Schubert, V.; Schneider, M.; Erkayhan, S. Rückert, P.; Tracht, K.; Heinen, K.: Produktlebenszyklusmanagement für MRK. In: Projektatlas Kompetenz Montage - Kollaborativ und Wandlungsf?hig (2019), 54-57
Rückert, P; Zur Sache: Kollaborative Montage will geübt sein. handling, 3(2019), 6-7.
Onken, A.-K.; Tracht, K.: Production speed - Transportation handling. In: Cold Micro Metal Forming. Hrsg: Vollertsen, F.; Friedrich, S.; Kuhfu?, B.; Maa?, P.; Thomy, C.; Zoch, H.-W., Springer Nature Switzerland AG (2020) 23.
Onken, A.-K.; Tracht, K.: Innovation speed. In: Cold Micro Metal Forming. Hrsg: Vollertsen, F.; Friedrich, S.; Kuhfu?, B.; Maa?, P.; Thomy, C.; Zoch, H.-W., Springer Nature Switzerland AG (2020) 12-14.
Wilhelmi, P.; Onken, A.-K.; Schenck, C.; Kuhfuss, B.; Tracht, K.: Linked Parts for Micro Cold Forming Process Chains. In: Cold Micro Metal Forming. Hrsg: Vollertsen, F.; Friedrich, S.; Kuhfu?, B.; Maa?, P.; Thomy, C.; Zoch, H.-W., Springer Nature Switzerland AG (2020) 98-114.
Meiners, F; Geppert, A.; Tracht, K.: Adh?sive Vereinzelung von Mikrokugeln - Effizientes Verfahren zum Vereinzeln und Positionieren im Hochdurchsatz. wt-online 109, 11/12 (2019) 840-844
Meiners, F.; Bader, A.; Beerepoot, J.; Tracht, K.: Releasing Strategies for Gecko-Inspired Microgrippers. Tagungsband des 4. Kongresses Montage Handhabung Industrieroboter, Eds.: T. Schüppstuhl; K. Tracht; J. Ro?mann. Springer Vieweg, Berlin (2019) 197-206.
Bader, A.; Toenjes, A.; Wielki, N.; M?ndle, A.; Onken, A.-K.; Hehl, A.; Meyer, D.; Brannath, W.; Tracht, K.: Parameter Optimization in High-Throughput Testing for Structural Materials. Materials, 12, (2019) 3439.
Kienzler, R.; Schr?der, R.: Einführung in die H?here Festigkeitslehre. 2. Auflage, Springer
Kienzler, R., Schneider, P., Altenbach, Holm (Hrsg.): A beam - Just a beam in linear plane bending. Advanced Structured Materials, In: Recent Developments in the Theory of Shells, 110 (2019), 329-350, Springer. https://doi.org/10.1007/978-3-030-17747-8_18
Kienzler, R.; Schneider, P.: A Beam - Just a Beam in Linear Plane Bending. 12th HSTAM International Congress on Mechanics, Thessaloniki, 22.-25.9.2019, [Konferenzver?ffentlichung]
Kienzler, R.; Schneider, P.: An A-priori Error Estimate for Consistent Plate Theories. 10th German-Greek-Polish Symposium on Recent Advances in Mechanics, Bedlewo, Polen, 15.9. - 18.9.2019, [Konferenzver?ffentlichung]
Kienzler, R.; Schneider, P.: A Beam - Just a Beam in Linear Plane Bending. XLVII International Conference on Advanced Problems in Mechanics, St. Petersburg, 24. - 29. Juni 2019, [Konferenzver?ffentlichung]
Schneider, P.; Kienzler, R.: Dual-energy extension of the uniform-approximation approach. Proc. Appl. Math. Mech. 19 (1), 1617-7061, https://doi.org/10.1002/pamm.201900222
Schneider, P.; Kienzler, R.: A-priori error estimation for energy based dimension-reduction techniques. 5th International Conference on Mechanics of Composites, Lissabon, 1. - 4. Juli 2019, [Konferenzver?ffentlichung]
Schneider, P.; Kienzler, R.: Teaching Mechanics: Inequalities in Statically Indeterminate Static Friction Problems. Advanced Structured Materials, In: New Achievements in Continuum Mechanics and Thermodynamics, 108 (2019), 465-474, Springer. https://doi.org/10.1007/978-3-030-13307-8_31
Kienzler, R.; Fischer, F.D.; Wessel, A.: An Improved Engineering Approach to Assess Crack Arrays - an Addendum to Arch. Appl. Mech. 84 (2014) 1325-1337. Arch. Appl. Mech., 89 (2019), 731-736. https://doi.org/10.1007/s00419-018-1493-4
Schowtjak, A.; Wang, S.; Hering, O.; Clausmeyer, T.; Lohmar, J.; Schulte, R.; Ostwald, R.; Hirt, G.; Tekkaya, A. E.: Prediction and analysis of damage evolution during caliber rolling and subsequent cold forward extrusion. Prod. Eng. Res. Devel., 14 (2019) 33–41. https://doi.org/10.1007/s11740-019-00935-x
Ostwald, R.; Kuhl, E.; Menzel, A.: On the implementation of finite deformation gradient-enhanced damage models. Computational Mechanics, 64(2019), 847–877. https://doi.org/10.1007/s00466-019-01684-5
Roters, F.; Diehl, M.; Shanthraj, P.; Eisenlohr, P.; Reuber , C.; Wong, S.L.; Maiti, T.; Ebrahimi, A.; Hochrainer, T.; Fabritius, H.-O.; Nikolov, S.: Friák, M.; Fujita, N.; Grilli, N.; Janssens, K.G.F.; Jia, N.; Kok, P.J.J.; Ma, D.; Meier, F.; Werner, E.; Stricker, M.; Weygand, D.; Raabe, D.: DAMASK – The Düsseldorf Advanced Material Simulation Kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale. Computational Materials Science, 158 (2019), 420-478. https://doi.org/10.1016/j.commatsci.2018.04.030
Meyer-Coors, M.: Entwicklung von konsistenten Plattentheorien beliebiger Approximationsordnung. 143. Norddeutsches Mechanik-Kolloquium, Bremen, 09. Februar 2019
Ostwald, R.: Kombination von regularisierter duktiler Sch?digung und Plastizit?t für die Simulation von Umformprozessen. 143. Norddeutsches Mechanik-Kolloquium, Bremen, 09. Februar 2019
Toenjes, A.; Ishkina, S.; von Hehl, A.; Schenck, C.; Zoch, H.-W.; Kuhfu?, B.: Multistage Eccentric Rotary Swaging HTM J. Heat Treatm. Mat. 73 (2018) 6, pp. 344-351, DOI:10.3139/105.110372; ISSN 1867-2493, Carl Hanser Verlag GmbH & Co. KG
Moumi, E.; Herrmann, M.; Schenck, C.; Kuhfu?, B.: High productivity micro rotary swaging 5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen MATEC Web Conf. Volume190, 5th International Conference on New Forming Technology (ICNFT 2018), Article No. 15002, https://doi.org/10.1051/matecconf/201819015002
Moumi, E.; Wilhelmi; P.;Schenck, C.; Herrmann, M.; Kuhfu?, B.: Material flow control in plunge micro rotary swaging 5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen MATEC Web Conf. Volume190, 5th International Conference on New Forming Technology (ICNFT 2018), Article No. 15014; https://doi.org/10.1051/matecconf/201819015014
Liu, Y.; Herrmann, M.; Schenck, C.; Kuhfu?, B.: Axial and Radial Material Flow Analysis in Infedd Rotary Swaging of Tubes 5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen MATEC Web Conf. Volume190, 2018, 5th International Conference on New Forming Technology (ICNFT 2018), Article No. 04003, https://doi.org/10.1051/matecconf/201819004003
Onken, A.-K.; Wilhelmi, P.; Tracht, K.; Kuhfu?, B.: Increased output in micro production by tolerance field widening and synchronisation 5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen MATEC Web Conf. Volume 190, 2018, 5th International Conference on New Forming Technology (ICNFT 2018), Article No. 15006 https://doi.org/10.1051/matecconf/201819015006
Wilhelmi, P.; Schattmann, C.; Schenck, C.; Kuhfu?, B.: Interactions between feed system and process in production of preforms as linked micro parts 5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen MATEC Web Conf. Volume 190, 2018, 5th International Conference on New Forming Technology (ICNFT 2018), Article No. 15004 https://doi.org/10.1051/matecconf/201819015004
Langst?dtler, L.; Pegel, H.; Herrmann, M.; Schenck, C.; St?bener, D.; Westerkamp, J.F.; Fischer, A.; Kuhfu?, B.: Electrohydraulic extrusion of sperical bronze (CuSn6) micro samples 8th International Conference on High Speed Forming (ICHSF 2018), 13-16 May 2018 Ohio/USA
Pegel, H.; Langst?dtler, L.; Herrmann, M.; Schenck, C.; Kuhfu?, B.: Electrohydraulic sheet metal forming with flexible tools 5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen MATEC Web Conf. Volume 190, 2018, 5th International Conference on New Forming Technology (ICNFT 2018), Article No. 12001 https://doi.org/10.1051/matecconf/201819012001
B?sing, I.; Herrmann, M.; Bobrov, I.; Th?ming, J.; Kuhfu?, B.; Epp, J.; Baune, M.: The influence of microstructure deformation on the corrosion resistance of cold formed stainless steel 5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen MATEC Web Conf. Volume 190, 2018, 5th International Conference on New Forming Technology (ICNFT 2018), Article No. 04002 https://doi.org/10.1051/matecconf/201819004002
B?hmermann, F.; Herrmann, M.; Riemer, O.; Kuhfu?, B.: Reducing Abrasive Particle Generation in Dry Rotary Swaging by Utilizing DLC Hard Coated Dies 5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen MATEC Web Conf. Volume 190, 2018, 5th International Conference on New Forming Technology (ICNFT 2018), Article No. 14011 https://doi.org/10.1051/matecconf/201819014011
Charni, D.; Ishkina, S.; Epp, J.; Herrmann, M.; Schenck, C.; Zoch, H.-W.; Kuhfu?, B.: Generation of residual stresses in rotary swaging process 5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen MATEC Web Conf. Volume 190, 2018, 5th International Conference on New Forming Technology (ICNFT 2018), Article No. 04001 https://doi.org/10.1051/matecconf/201819004001
Toenjes, A.; Ishkina, S.; Schenck, C.; von Hehl, A.; Zoch, H.-W.; Kuhfu?, B.: Eccentric rotary swaging variants 5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen MATEC Web Conf. Volume 190, 2018 5th International Conference on New Forming Technology (ICNFT 2018), Article No. 15003, https://doi.org/10.1051/matecconf/201819015003
Langst?dtler, L.; Pegel, H.; Herrmann, M.; Schenck, C.; Kuhfu?, B.: Electrohydraulic incremental bulk metal forming 5th International Conference on New Forming Technology (ICNFT 2018), September 18-21, 2018, Bremen MATEC Web Conf. Volume 190, 2018 5th International Conference on New Forming Technology (ICNFT 2018), Article No. 03001, https://doi.org/10.1051/matecconf/201819003001
Langst?dtler, L.; Herrmann, M.; Schenck, C.; Kuhfu?, B.: Electromagnetic Joining of Thin Sheets by Adapted Pulses Key Engineering Materials, Online: 2018-04-24, ISSN: 1662-9795, Vol. 767, pp 439-446, doi:10.4028/www.scientific.net/KEM.767.439 ? 2018 Trans Tech Publications, Switzerland https://www.scientific.net/KEM.767.439.pdf
Herrmann, M.; Schenck, C.; Kuhfu?, B.: Dry Rotary Swaging with Structured and Coated Tools The 21st anniversary of the International ESAFORM Conference on Material Forming (Esaform 2018), 23.-25. April 2018, Palermo (Italy)
Herrmann, M.; Schenck, C.; Kuhfu?, B.: Graded Structured Tools for Dry Rotary Swagingn Dry Met. Forming OAJ FMT 4 (2018) pages 018-024
Ishkina, S.; Schenck, C.; Kuhfu?, B.: Conditioning of Material Properties by Micro Rotary Swaging The 21st anniversary of the International ESAFORM Conference on Material Forming (Esaform 2018), 23.-25. April 2018, Palermo (Italy) Citation: AIP Conference Proceedings 1960, 160013 (2018); https://doi.org/10.1063/1.5035039 View online: https://aip.scitation.org/doi/10.1063/1.5035039 View Table of Contents: http://aip.scitation.org/toc/apc/1960/1 Published by the American Institute of Physics
Herrmann, M.; Hasselbruch, H.: Rundkneten ohne Schmierstoff Umformtechnik Massiv+Leichtbau, Ausgabe 02/2018, Meisenberg Verlag, Bamberg https://www.umformtechnikmagazin.de/umformtechnik-forschung/rundkneten-ohne-schmierstoff_34846_de/
Sievers, T.; Hogreve, S.; Tracht, K.: Decentralised dis- and reassembly control in maintenance of large-scale products. Procedia Manufacturing, Volume 16, ed.: G. M. Castelluccio. Elsevier Amsterdam (2018) 187-192. DOI: 10.1016/j.promfg.2018.10.161
Sievers, T.; Tracht, K.: Dezentrale Montagesteuerung in der Gruppenmontage. ZWF, 9 (2018) 2-5. DOI: 10.3139/104.111963
Rückert, P.; Onken, A.-K.; Tracht, K.: Langzeitspeicherung von Teileverbunden in der Mikroproduktion, Werkstattstechnik online 108/7-8 (2018), 525-529
Rückert, P; Roggendorf, S.: Arbeiten im Verbund - Kollaborative Montage variantenreicher Produkte. handling, 4 (2018), 22-23.
Rückert, P.; Adam, J.; Papenberg, P.; Paulus, H.; Tracht, K.: Calibration of a modular assembly system for personalized and adaptive human robot collaboration. In: Procedia CIRP, Volume 76
(2018), 199-204, doi.org/10.1016/j.procir.2018.01.041.
Rückert P., Meiners F., Tracht K. (2018) Augmented Reality for teaching collaborative robots based on a physical simulation. In: Schüppstuhl T., Tracht K., Franke J. (eds) Tagungsband des 3. Kongresses Montage Handhabung Industrieroboter. Springer Vieweg, Berlin, Heidelberg
Onken, A.-K.; Wilhelmi, P.; Tracht, K.; Kuhfu?, B.: Increased output in micro production by tolerance field widening and synchronisation. 5th International Conference on New Forming Technology
(ICNFT 2018), eds.: F. Vollertsen, T.A. Dean, Y. Qin and S.J. Yuan. MATEC Web Conf. 190 15006 (2018) DOI: doi.org/10.1051/matecconf/201819015006
Tracht, K.; Onken, A.-K.; Gralla, P.; Emad, J.; Kipry, N.; Maa?, P.: Trend-specific clustering for micro mass production of linked parts. CIRP Annals 67, 1 (2018) 9-12.
Meiners, F., Tracht, K.: Clamping of Microspheres with Low Melting Metals. Proceedings of the 2nd World Congress on Micro and Nano Manufacturing (WCMNM 2018) Eds.: J. Valentin?i?, M. Jun, K. Dohda, S. Dimov, Portoro? (2018) 367-370
Gebert, K.; Bader, A.; Tracht K.: Decision tool for designing derivative products for supporting assembly planning of large-volume assembly groups. Procedia CIRP, 76 (2018) 31–35.
DOI: 10.1016/j.procir.2018.01.031.
Gebert, K.; Onken A.K.; Tracht K.: Assembly workshops for acquiring and integrating expert knowledge into assembly process planning using rapid prototyping model.
In: Tagungsband des 3. Kongresses Montage Handhabung Industrieroboter. Eds: Schüppstuhl, T.; Tracht, K.; Franke, J., Springer Vieweg Berlin Heidelberg (2018) 13–21.
DOI: 10.1007/978-3-662-56714-2_2.
Bader, A.; Meiners, F.; Tracht, K.: Accelerating High-throughput Screening for Structural Materials with Productions Management Methods. Materials, 11, 8 (2018) 1330.
Bader, A.; Onken, A.-K.; Tracht, K.: Order Release for Temporary Paced Sequences in Flexible High Throughput Systems. Procedia CIRP, Vol. 72 (2018) 689-694.
Altenbach, H.; Jablonski, F.; Müller, W. H.; Naumenko, K.; Schneider, P. (Hrsg.): Advances in Mechanics of Materials and Structural Analysis. Advanced Structured Materials (80), Springer. https://doi.org/10.1007/978-3-319-70563-7
Bakir, A.; Hochrainer, T.; Tushtev, K.; Rezwan, K.: Determing three dimensional failure surfaces for porous ceramics from FE simulations and mechanical testing, 21st European Workshop on Automatic Differentiation, Jena, 19. - 20. November 2018, http://www.autodiff.org/Docs/euroad/21st EuroAd Workshop - Ahmad Bakir - Determing three dimensional failure surfaces for porous ceramics from FE simulations and mechanical testing.pdf
Schowtjak, A.; Clausmeyer, T.; Ostwald, R.: Modellintegration für die Prozesssimulation, SFB/Transregio 188 Industriekolloquium, Dortmund, 15. November 2018
Ostwald, R.; Sprave, L.; Schulte, R.; Menzel, A.: A gradient-enhanced damage implementation for the simulation of damage in metal forming processes, 2nd Materials Chain International Conference (MCIC), Bochum, 12. - 14. November 2018
Ostwald, R.; Kuhl, E.; Menzel, A.: A computational framework for the simulation of regularised damage, Materials Science and Engineering (MSE) Congress, Darmstadt, 26. - 28. September 2018, Darmstadt University of Technology
Schneider, P.; Kienzler, R.: Modeling of Reisner-type Plate Theory to Monoclinic Material. Book of proceedings. 21st International Conference on Composite Structures. Bologna, 04. - 07- September 2018, 18 (2018)
Ostwald, R., Kuhl, E.; Menzel, A.: Implementation of a gradient-enhanced damage model – a heat equation-based framework, 6th European Conference on Computational Mechanics (Solids, Structures and Coupled Problems) – ECCM 6, Glasgow, 11. - 15. Juni 2018
Zei?ig, M.; Jablonski, F.; Kienzler, R.: Beschreibung des Einflusses prozessbedingter Poren auf die mechanischen Eigenschaften von SLM-Proben, 50. Tagung des DVM-Arbeitskreises Bruchmechanik und Bauteilsicherheit, Paderborn, 20. - 21. Februar 2018
Schneider, P.; Kienzler, R.: Modelling of Anisotropic Boundary Layer Effects in Plate Theories. Proc. Appl. Math. Mech. 18 (1). https://doi.org/10.1002/pamm.201800397
Schr?der, R.; Bitykov, V.; Kienzler, R.: Simulation and Evaluation of Different Metal-Fibre-Transition Structures. Science-Report of the Research Unit “Schwarz-Silber” (FOR 1224). Faser-Institut Bremen e. V. (2018) 99-127
Ostwald, R.; Schulte, R.; Sprave, L.; Menzel, A.: Towards the simulation of complex metal forming processes: combination of regularised damage and contact, Vierte Sitzung der Arbeitsgruppe Simulation des Arbeitskreises Bruchmechanik und Bauteilsicherheit des Deutschen Verbandes für Materialforschung und -prüfung e.V. (DVM), Institute of Forming Technology and Lightweight Components (IUL), TU Dortmund
Onken, A.-K.; Wilhelmi, P.; Rückert, P.; Tracht, K.; Kuhfu?, B. : Toleranzfeldaufweitung durch gezielte Kombination von Fügepartnern in der Mikroproduktion 8. Kolloquium Mikroproduktion, 27.-28.11.17, Bremen, Tagungsband S. 259-266, Hrsg.: F. Vollertsen, C. Hopmann, V. Schulze, J. Wulfsberg, BIAS Verlag, 2017, ISBN 978-3-933762-56-6
Schattmann, C.; Wilhelmi, P.; Schenck, C.; Kuhfu?, B.; Vollertsen, F. : Erh?hung der Taktrate bei der Herstellung von Zwischenformen im Linienverbund8. Kolloquium Mikroproduktion, 27.-28.11.17, Bremen, Tagungsband S. 227-236, Hrsg.: F. Vollertsen, C. Hopmann, V. Schulze, J. Wulfsberg, BIAS Verlag, 2017, ISBN 978-3-933762-56-6
Rippel, D.; Moumi, E.; Lütjen, M.; Schenck, C.; Freitag, M.; Kuhfu?, B. :Charakterisierung der Einflüsse einzelner Prozessparameter auf die Werkstückgeometrie beim Einstechrundkneten im Mikrobereich 8. Kolloquium Mikroproduktion, 27.-28.11.17, Bremen, Tagungsband S. 219-226, Hrsg.: F. Vollertsen, C. Hopmann, V. Schulze, J. Wulfsberg, BIAS Verlag, 2017, ISBN 978-3-933762-56-6
Toenjes, S.; Ishkina, S.; von Hehl, A.; Schenck, C.; Zoch, H.-W.; Kuhfu?, B. : Untersuchung der inneren Struktur von exzentrisch rundgekneteten Bauteilen aus X5CrNi18-10 8. Kolloquium Mikroproduktion, 27.-28.11.17, Bremen, Tagungsband S. 107-112, Hrsg.: F. Vollertsen, C. Hopmann, V. Schulze, J. Wulfsberg, BIAS Verlag, 2017, ISBN 978-3-933762-56-6
Ishkina, S.; Schenck, C.; Kuhfu?, B. : Konditionierung von Halbzeugen durch Mikrorundkneten 8. Kolloquium Mikroproduktion, 27.-28.11.17, Bremen, Tagungsband S. 99-101, Hrsg.: F. Vollertsen, C. Hopmann, V. Schulze, J. Wulfsberg, BIAS Verlag, 2017, ISBN 978-3-933762-56-6
Moumi, E.; Herrmann, M.; Schenck, C.; Kuhfu? B. : Einfluss von Fertigungsparametern auf geometrische Merkmale rundgekneteter Mikrobauteile 8. Kolloquium Mikroproduktion, 27.-28.11.17, Bremen, Tagungsband S. 83-90, Hrsg.: F. Vollertsen, C. Hopmann, V. Schulze, J. Wulfsberg, BIAS Verlag, 2017, ISBN 978-3-933762-56-6
Ishkina, S.; Schenck; C.; Kuhfu?, B.; Moumi, E.; Tobeck, K. Eccentric Rotary Swaging International Journal of Precision Engineering and Manufacturing, July 2017, Volume 18, Issue 7, pp 1035–1041 https://link.springer.com/article/10.1007/s12541-017-0122-4
Leu, A.; Razavi, M.; Langst?dtler, L.; Ristic-Durrant, D.; Raffel, H.; Schenck, C.; Gr?ser, A.; Kuhfu?, B. : Robotic green asparagus selective harvesting IEEE/ASME Transactions on Mechatronics, Volume 22, Issue 6, 2017, S. 2401-2410, DOI: 10.1109/TMECH.2017.2735861, Print ISSN: 1083-4435, Online ISSN 1941-014X http://ieeexplore.ieee.org/search/searchresult.jsp?newsearch=true&queryText=Robotic%20green%20asparagus%20selective%20harvesting
Herrmann, M.; Schenck, C.; Kuhfu?, B. : Graded structured tools for dry rotary swaging 6th International Conference on Manufacturing Engineering, 5-6 October, 2017, Thessaloniki, Greece
Almohallami, A.; Arghavani, M.; B?hmermann, F.; Frei?e, H.; Herrmann, M.; Mousav, S.A.; Sch?ler, S.; Scholz, P.; Tenner, J.; Teller, M.; Umlauf, G.; Wulf, D.; Yilkiran, D.; Maier, H.J. : How dry is dry? - A critical analysis of surface conditions used in dry metal forming Dry Met. Forming OAJ FMT 3 (2017) 090-094 http://www.drymetalforming.de/
Wilhelmi, P.; Schenck, C.; Kuhfu?, B. : Handling in the Production of Wire-Based Linked Micro Parts Micromachines 2017, 8(6) (2017) 169; doi:10.3390/mi8060169, Verlag MDPI, Basel http://www.mdpi.com/2072-666X/8/6/169
Liu, Y.; Herrmann, M.; Schenck, C.; Kuhfu?, B. : Plastic Deformation History In Infeed Rotary Swaging Process The 20th International ESAFORM Conference on Material Forming (ESAFORM 2017), 26th-28th April 2017, Dublin/Ireland
Herrmann, M.; Liu, Y.; Schenck, C.; Kuhfu?, B.; Ohlsen, I. : Evolution of Heat In Dry Rotary Swaging The 20th International ESAFORM Conference on Material Forming (ESAFORM 2017), 26th-28th April 2017, Dublin/Ireland
Wilhelmi, P.; Schenck, C.; Kuhfu?, B. : Linked Micro Parts Referencing System Journal of Mechanics Engineering and Automation 7 (2017), S. 44-49 doi: 10.17265/2159-5275/2017.01.006
B?hmermann, F.; Herrmann, M.; Riemer, O.; Kuhfu?, B. : Abrasive Particle Generation in Dry Rotary Swaging Dry Metal Forming Open Access Journal OAJ FMT 1 (2017) S. 001-006
Rückert, Patrick & Wohlfromm, Laura & Tracht, Kirsten. (2018). Implementation of virtual reality systems for simulation of human-robot collaboration. Procedia Manufacturing. 19. 164-170. 10.1016/j.promfg.2018.01.023.
Rückert, P.; Onken, A.-K.; Tracht, K.:Besch?digungsfreies Speichern von Teileverbunden in der Mikroproduktion. In: Vollertsen, F.; Hopmann, C.; Schulze, V.; Wulfsberg, J. (Eds.): 8. Kolloquium Mikroproduktion. BIAS Verlag, Bremen (2017).
Rückert, P.; Adam, J.; Papenberg, B.; Paulus, H.; Tracht, K.: Assistenzsysteme zur kollaborativen Montage - Mensch-Roboter-Assistenzsysteme basierend auf Bildverarbeitung und Sprachsteuerung. wt Werkstattstechnik online, 9 (2017)
Onken, A.-K.; Wilhelmi, P.; Rückert, P.; Tracht, K.; Kuhfuss, B.: Toleranzfeldaufweitung durch gezielte Kombination von Fügepartnern in der Mikroproduktion. 8. Kolloquium Mikroproduktion, eds.: Vollertsen, F.; Hopmann, C.; Schulze, V.; Wulfsberg, J.. BIAS Verlag, Bremen (2017).
Onken, A.-K.; Meiners, F.; Tracht, K.: Spare parts for selectively assembled linked parts in micro production. Procedia Manufacturing 19, (2018) 82-86 .
Onken, A.-K.; Rückert, P.; Perl, C.; Tracht, K.: Joining Linked Micro Formed Parts through Tolerance Field Widening and Synchronization. In: Tagungsband des 2. Kongresses Montage Handhabung Industrieroboter. Hrsg: T. Schüppstuhl, J. Franke, K. Tracht, Springer-Verlag Berlin (2017).
Meiners, F.; Hogreve, S.; Tracht, K.: Boundary Conditions in Handling of Microspheres Induced by Shape Deviation Constraints. In: Tagungsband des 2. Kongresses Montage Handhabung Industrieroboter. Hrsg: T. Schüppstuhl, J. Franke, K. Tracht, Springer-Verlag Berlin (2017).
Bader, A.; Lorenz, J.; Tracht, K.: Logistische Steuerung für Hochdurchsatzsysteme: Struktur einer Belegungsplanung für strukturell dynamische Hochdurchsatzsysteme. wt-online, 11/12 (2017) 847-851.
Bader, A.; Gebert, K.; Hogreve, S.; Tracht, K.: Derivative Products Supporting Product Development and Design for Assembly. Procedia Manufacturing, 19 (2018) 143–147.
DOI: 10.1016/j.promfg.2018.01.020.
Kienzler, R. (Ed.): Defect and Material Mechanics. Springer
Schneider, P.; Kienzler, R.: A Reissner-type Plate Theory for Monoclinic Material Derived by Extending the Uniform Approximation Technique by Orthogonal Tensor Decompositiones of nth-order gradients. Meccanica, 52 (2017), 2143-2167. https://doi.org/10.1007/s11012-016-0573-1
Kienzler, R.; Schneider, P.: Second-order Linear Plate Theories: Partial Differential Equations, Stress Resultants and Displacements. International Journal of Solids and Structures, 115-116 (2017), 14-26. https://doi.org/10.1016/j.ijsolstr.2017.01.004
Kienzler, R.; Schneider, P.: Beams in Plane Bending. Shell Structures: Theory and Applications, 4 (2017), 541-544, CRC Press. https://doi.org/10.1201/9781315166605
Ishkina, S.; Schenck, C.; Kuhfu?, B.;Moumi, E.;Tobeck, K. : Eccentric Rotary Swaging International Symposium on Green Manufacturing and Applications (ISGMA 2016) International Journal of Precision Engineering and Manufacturing, Vol. 18, No. 7, pp. 1035-1041 DOI: 10, 1007/Is12541-017-0122-4 ISSN2234-7593 (Print)/2005-4602 (online) http://rdcu.be/tYsw
Langst?dtler, L. : Electromagnetic embossing and forming of optical microstructures I2FG workshop on impulse metalworking, 2nd December 2016, Nantes
Langst?dtler, L.; Sch?nemann, L.; Schenck, C.; Kuhfu?, B. : Sequenced electromagnetic embossing and forming of optical microstructures EUSPEN Special Interest Group Meeting Structured and Freeform Surfaces Meeting, 9th-10th November 2016, DTU Copenhagen
Herrmann, M.; Moumi, E.; Ishkina, S.; Schenck, C.; Liu, Y.; Kuhfu?, B. : Werkstofffluss beim Rundkneten 23. S?chsische Fachtagung Umformtechnik Professur Formgebende Fertigungsverfahren (SFU 2016) Technische Universit?t Dresden, 7./8. Dezember 2016, Dresden
Wilhelmi, P.; Schenck, C.; Kuhfu?, B. : Diameter adaptive guides for wire based linked micro parts Proceedings of the 11th Conference on Multi-Material Micro Manufacture (4M), Kgs. Lyngby, Denmark, September 13-15, 2016, ISBN 978-981-11-0749-8
Bloem, A.; Schenck, C.; Kuhfu?, B. : Dynamic behavior of ultra precision feed axis at increased velocities 7th HPC 2016 - CIRP Conference on High Performance Cutting, Proceedia CIRP 46 (2016) 456-459
Foremny, E.; Schenck, C.; Kuhfu?, B. : Coupling system for ultra precision machining Journal of Mechanics Engineering and Automation, USA, 2016, ISSN 2159-5275
Foremny, E.; Schenck, C.; Kuhfu?, B. : Dynamic behavior of an ultra precision spindle used in machining of optical components Procedia CIRP (2016), 30th May, 2016, S. 452-455 http://dx.doi.org/10.1016/j.procir.2016.04.039
Herrmann, M.; B?hmermann, F.; Hasselbruch, H. ; Kuhfu?, B.; Riemer, O.; Mehner, A.; Zoch, H.W. : Forming without lubricant - Functionalized tool surfaces for dry forming applications 14th Global Conference on Sustainable Manufactu-ring (GCSM), 3rd-5th October, 2016, Stellenbosch/Südafrika
Cui, C.; Schulz, A.; Moumi, E.; Kuhfu?, B.; B?hmermann, F.; Riemer, O. : Graded tool material for micro cold forming via a novel spray forming process 10th Tool Conference (Tool 2016), October 4th-7th, 2016, Bratislava/ Slovakia
Cui, C.; Schulz, A.; Moumi, A.; Kuhfu?, B.; B?hmermann, F.; Riemer, O. : Co-spray-formed graded steel for micro rotary swaging tools International Journal of Mechatronics and Manufacturing Systems (IJMMS), 2016
Wilhelmi, P.; Foremny, E.; Bloem, A.; Schenck, C.; Kuhfu?, B. : High Speed Referencing System for Linked Micro Parts 11th International Conference on Micro Manufacturing (ICOMM 2016), March 28th-31st 2016, Orange County, California (Paper No. 19)
Hasselbruch, H.; Herrmann, M.; Mehner, A.; Kuhfu?, B.; Zoch, H.W. : Incremental dry forging - Interaction of W-DLC coatings and surface structures for rotary swaging tools 14th Global Conference on Sustainable Manufactu-ring (GCSM), 3rd-5th October, 2016, Stellenbosch/Südafrika
Moumi, E.; Herrmann, M.; Schenck, C.; Kuhfu?, B.; Grelak, F. : Material Flow in Micro and Macro Rotary Swaging International Symposium on Green Manufacturing and Applications (ISGMA 2016), June 21st-25th, 2016, Bali, Indonesien
Bloem, A.; Schenck, C.; Kuhfu?, B. : Adaptive state-space model for ultra-precision feed axis 3rd International Conference on System-Integrated Intelligence: New Challenges for Product and Production Engineering (SysInt2016), June 13th-15th 2016, Paderborn Procedia Technology 00 (2016), S. 000-000
Bloem, A.; Wilhelmi, P.; Schenck, C.; Kuhfu?, B. : 2D position sensor based on speckle correlation-experimental setup for high-speed measurements and in field tests 11th International Conference on Micro Manufactu-ring (ICOMM 2016), March 28th-31st 2016, Orange County, California (Paper No. 17)
Langst?dtler, L.; Sch?nemann, L.; Schenck, C.; Kuhfu?, B. :Electromagnetic embossing of optical micro structures ASME Journal of Micro- and Nano-Manufacturing June 2016, Volume 4, Issue 2
Foremny, E.; Schenck, C.; Kuhfu?, B. : Integrated ultrasonic driven balancer for ultra precision high speed machine tools 3rd International Conference on System-integrated Intelligence: New Challenges for Product and Production Engineering (SysInt 2016), June 13th- 15th 2016, Paderborn Procedia Technology 00 (2016), S. 000-000
Weikert, F.; Tracht K.: STEP product model for micro formed linked parts. Production Engineering - Research and Development, Vol. 10, Nr. 3 (2016) 293-303.
http://dx.doi.org/10.1007/s11740-016-0667-6
Schneider, D.; Tracht, K.; Meyer-Stender, M.; Mederer, M.: Customer stock in repairable item systems. Production Engineering - Research and Development, Vol. 10, Nr. 2 (2016) 209-216. DOI 10.1007/s11740-015-0654-3.
Schreiber, S.; Funke, L.; Tracht, K.:BERTHA - A Flexible Learning Factory for Manual Assembly. Procedia CIRP, 54 (2016) 119-123.
Onken, A.; Bader, A.; Tracht, K.: Logistical Control of Flexible Processes in High-throughput Systems by Order Release and Sequence Planning. Procedia CIRP 52, (2016) 245-250.
Kaczmarek, S.; Hogreve, S.; Greten, A.; Schr?der, M.; Tracht, K.: Improving Design Efforts and Assembly Efficiency of Rotor Blade Carriers through Modularisation. Procedia CIRP, 50 (2016) 76-81. ISSN 2212-8271, http://dx.doi.org/10.1016/j.procir.2016.05.021.
Hogreve, S; Kaczmarek, S.: Den Fortschritt erkennen - Gesten- und Fortschrittserkennung in der manuellen Montage. handling, 9 (2016), 72–73.
Hogreve, S.; Kaczmarek, S.; Adam, J.; Franz, L.; D?llen, T.; Paulus, H.; Reinkemeyer, V.; Tracht, K.: Controlling and assisting manual assembly processes by automated progress and gesture recognition. Applied Mechanics and Materials 840 (2016) 50–57. 10.4028/ www.scientific.net/AMM.840.50.
Langst?dtler, L. : Micro Applications of Electromagnetic Forming I2FG Workshop Electromagnetic pulse forming & joining 2015, Dortmund
Herrmann, M.; Hasselbruch, H.; B?hmermann, F.; Kuhfu?, B.; Zoch, H.W.; Mehner, A.; Riemer, O. : Dry Rotary Swaging Dry Metal Forming Open Access Journal FMT 1 (2015), S. 96-102
B?hmermann, F.; Hasselbruch, H.; Herrmann, M.; Riemer, O.; Mehner, A.; Zoch, H.-W.; Kuhfu?, B. : Trockenrundkneten Funktionalisierte Werkzeugoberfl?chen für eine schmierstofffreie Prozessauslegung wt-online - Ausgabe 11/12-2015, S. 830-835 Springer Verlag http://www.werkstattstechnik.de/wt/currentarticle.php?data[article_id]=84719
Ishkina, S.; Kuhfu?, B.; Schenck, C. : Beeinflussung der Kornstruktur und der Umformbarkeit des Drahtes durch angepasste Prozesskinematik beim Mikrorundkneten 7. Kolloquium Mikroproduktion, 16.-17.11.15, Aachen
Wilhelmi, P.; Moumi, E.; Schenck, C.; Kuhfu?, B. : Werkstofffluss beim Mikrorundkneten im Linienverbund 7. Kolloquium Mikroproduktion, 16.-17.11.15, Aachen
Kuhfu?, B.; Moumi, E. : Erh?hung der Umformgeschwindigkeit beim Mikrorundkneten durch Einsatz von Zwischenelementen 7. Kolloquium Mikroproduktion, 16.-17.11.15, Aachen
Riemer, O.; Sch?nemann, L.; D?rgeloh, T.; Beinhauer, A.; Foremny, E.; Brinksmeier, E.; Kuhfu?, B. : Balancing concepts for high speed aerostatic spindles 30th ASPE Annual Meeting, November 1-6, 2015, Austin, Texas/USA
Herrmann, M.; Kuhfu?. B.; Schenck, C. : Dry rotary swaging with structured tools 13th Global Conference on Sustainable Manufacturing (GCSM 2015), 16th-18th September, 2015,Ho Chi Minh City (Vietnam)
Li, L. : Instationary Modal Analysis for Impulse-Type Stimulated Structures Dissertation Dr.-Ing., Universit?t Bremen, 2015
Herrmann, M.; Schenck; C.; Kuhfu?, B. : FEM simulation of infeed rotary swaging with structured tools 4th International Conference on New Forming Technology (ICNFT2015) 6th to 9th August, 2015, Glasgow, Scotland/UK
Ishkina, S.; Kuhfu?, B.; Schenck, C. : Influence of the relative rotational speed on component features in micro rotary swaging 4th International Conference on New Forming Technology (ICNFT2015) 6th to 9th August, 2015, Glasgow, Scotland/UK
Langst?dtler, L.; Schenck, C.; Kuhfu?, B. : Effective electromagnetic forces in thin sheet metal specimen 4th International Conference on New Forming Technology (ICNFT2015) 6th to 9th August, 2015, Glasgow, Scotland/UK
Hasselbruch, H.; Herrmann, M.; Mehner, A.; Zoch, H.W.; Kuhfu?, B. : Development, characterization and testing of tungsten doped DLC coatings for dry rotary swaging 4th International Conference on New Forming Technology (ICNFT2015) 6th to 9th August, 2015, Glasgow, Scotland/UK
Herrmann, M.; Kuhfu?, B.; Schenck, C. : Dry Rotary Swaging - Tube Forming 18th International ESAFORM Conference on Material Forming (ESAFORM 2015), 15.-17. April 2015, Graz/Austria
Cui, C.; Schulz, A.; Moumi, E.; Kuhfu?, B.; B?hmermann, F.; Riemer, O. : Development of micro rotary swaging tools of graded tool steel via co-spray forming 4th International Conference on New Forming Technology (ICNFT2015) 6th to 9th August, 2015, Glasgow, Scotland/UK
Sch?nemann, L. Preu?, W.; Brinksmeier, E.; Denkena, B.; Foremny, E.; Kuhfu?, B. : Ultrapr?zise Hochgeschwindigkeitsbearbeitung Teil 1: Steigerung der Fl?chenleistung durch den Einsatz von Mehrfach-Werkzeugen und HSC-Spindeln wt Werkstattstechnik online Jahrgang 105 (2015), H. 6, S. 366-370 http://www.werkstattstechnik.de/wt/currentarticle.php?data[article_id]=83722
Sch?nemann, L.; Brinksmeier, E.; Riemer, O.; Sassi, N.; Krüger, R.; Denkena, B.; Bloem, A.; Kuhfu?, B. : Ultrapr?zise Hochgeschwindigkeitsbearbeitung Teil 2: Potentiale elektromagnetischer Linearführungen kombiniert mit modellbasierten Steuerungskonzepten wt Werkstattstechnik online Jahrgang 105 (2015), H. 7/8, S. 469-474 http://www.werkstattstechnik.de/wt/get_article.php?data[article_id]=83997
B?hmermann, F.; Hasselbruch, H.; Herrmann, M.; Riemer, O.; Mehner, A.; Zoch, H. W.; Kuhfu?, B. : Dry Rotary Swaging - Approaches for a Lubricant Free Process Design
International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 2, No. 4, S. 325-331
Cui, C; Schulz, A.; Moumi, E.; Kuhfu?, B.; B?hmermann, F. :Graded tool steel for micro rotary swaging via co-spray forming 8th International Conference and Exhibition on Design and Production of Machines And Dies/Molds June 18 - 21, 2015, Ku?adasi/ Türkei, Tagungsband S. 191-198
Kuhfu?, B.; Moumi, E.; Clausen, B.; Epp, J.; K?hler, B. : Investigation of deformation induced martensitic transformation during incremental forming of 304 stainless steel wires 18th International ESAFORM Conference on Material Forming (ESAFORM 2015), 15.-17. April 2015, Graz/Austria Key Eng. Mat. 651-653 (2015) 645-650, https://doi.org/10.4028/www.scientific.net/KEM.651-653.645
Langst?dtler, L.; Sch?nemann, L.; Bloem, A.; Schenck, C.; Kuhfu?, B. : Replication of prismatic microstructures by electromagnetic embossing Proceedings of the 4M/ICOMM2015 International Conference on Micromanufacturing, 31st March-2nd April, 2015, Milano (Italy), ISBN 978-981-09-4609-8, Tagungsband S. 219-222
Foremny, E.; Schenck, C.; Kuhfu?, B. : High precision coupling system Proceedings of the 4M/ICOMM2015 International Conference on Micromanufacturing, 31st March-2nd April, 2015, Milano (Italy), ISBN 978-981-09-4609-8, Tagungsband S. 205-208
Bloem, A.; Schenck, C.; Kuhfu?, B. : 2D position sensor based on speckle correlation Proceedings of the 4M/ICOMM2015 International Conference on Micromanufacturing, 31st March-2nd April, 2015, Milano (Italy), ISBN 978-981-09-4609-8, Tagungsband S. 541-544
Herrmann, M.; Hasselbruch, H.; B?hmermann, F.; Kuhfu?, B.; Zoch, H.W.; Mehner, A.; Riemer, O. : Potentials of Dry Rotary Swaging Dry Met. Forming Open Access Journal, FMT 1 (2015) S. 63-71 http://suche.suub.uni-bremen.de/peid=P00104220&LAN=DE&CID=&index=L&Hitnr=1
Ishkina, S.; Kuhfu?, B.; Schenck, C. : Grain size modification by micro rotary swaging 18th International ESAFORM Conference on Material Forming (ESAFORM 2015), 15.-17. April 2015, Graz/Austria
Schneider, D.; Funke, L.; Tracht, K.: Logistische Steuerung von Hochdurchsatzprüfungen - Steuerung von Mikrobproben in einem System mit 澳门皇冠_皇冠足球比分-劲爆体育ere Prüfstationen, wt Werkstattstechnik online 105, 11/12 (2015) 818-823.
Schuh, P.; Schneider, D.; Funke, L.; Tracht, K..: Cost-optimal spare parts inventory planning for wind energy systems. Logistics Research Vol. 8, No. 1, Springer Berlin Heidelberg (2015), Doi: 10.1007/s12159-015-0122-7.
Kaczmarek, S.; Hogreve, S.; Tracht, K.: Progress Monitoring and Gesture Control in Manual Assembly Systems Using 3D-image Sensors. Procedia CIRP 37, 1–6 (2015). DOI: 10.1016/j.procir.2015.08.006.
Hogreve, S.; Teetz, P.; Tracht, K.: Form- und stoffschlüssiges Spannen von Mikrokugeln - Niedrigschmelzende Legierungen und schnell h?rtende Klebstoffe als Spannmittel in der Mikrotechnik. wt Werkstattstechnik online 105, 9 (2015) 633–639.
Tracht, K.; Funke, L; Schottmayer, M.: Online-control of assembly processes in paced production lines. CIRP Annals - Manufacturing Technology, 64 (2015), Heft 1, 395-398.
Funke, L.; Hogreve, S.: Autonomie in der Montage - Flexibilit?t in der Produktion variantenreicher Maschinen. handling, 7-8 (2015) 32–33.
Tracht, K; Funke, L.; Schneider, D.: Varying Repair Capacity in a Repairable Item System. Proceedia CIRP, Vol. 17, (2014), 446-450.
Weikert, F.; Kr?ger, A.; Tracht, K.: Auslegung von Prozessketten der Mikroumformung für die Verwendung von Teileverbunden. wt Werkstattstechnik online 104, 11/12 (2014) 722 – 727.
Weikert, F.; Tracht, K.: Konstruktionsbaukasten für Leiterverbunde des Mikroumformens. Konstruktion, 3 (2014) 70 - 74.
Schuh, P.; Perl, C.; Tracht, K.: Integration of Operational Data into Maintenance Planning. In: Through-life Engineering Services: Motivation, Theory, and Practice. Hrsg.: Redding, L. und Roy, R., Springer (2015) 225-240.
Schuh, P.; Stern, H.; Tracht, K.: Integration of expert judgment into remaining useful lifetime prediction of components. Procedia CIRP, Vol. 22 (2014), 109-114.
Schuh, P.; Funke, L.; Tracht, K.: Cost optimal spare parts planning for wind energy systems. 7th International Scientific Symposium on Logistics, 4 - 5 Juni (2014) K?ln, 7 - 24.
Fantoni, G.; Santochi, M.; Dini , G.; Tracht, K.; Scholz-Reiter, B.; Fleischer, J.; Lien, TK.; Seliger, G.; Reinhart, G.; Franke, J.; Hansen, H.N.; Verl, A.:
Grasping devices and methods in automated production processes. CIRP Annals - Manufacturing Technology 63, 2 (2014) 679–701. 10.1016/j.cirp.2014.05.006.
Hogreve, S.; Tracht, K.: Design and implementation of multiaxial force sensing gripper fingers. Production Engineering - Research and Development 8, 6 (2014) 765–772. 10.1007/s11740-014-0563-x.
Weikert, F.; Weyhause, J.; Tracht, K.; Moumi, E.; Kuhfu?, B.; Brüning, H.; Vollertsen, F.: Beurteilung von Linienverbunden der Mikroumformung 6. Kolloquium Mikroproduktion, ed.: R.Tutsch. Braunschweig, Deutschland (2013) B13 ? Shaker Verlag Aachen 2013
Weikert, F.; Weyhausen, J.; Tracht, K.: Statistical Study for Micro Forming Technologies Used for Linked Parts Production5th International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV’13), eds.: M.F. Zaeh. Munich, Germany (2013) 41 – 46 DOI: 10.1007/978-3-319-02054-9_8, ? Springer International Publishing Switzerland 2014
Tracht, K.; Weikert, F.: Definition eines STEP-Modells für Leiterverbunde der Mikroumformtechnik. wt Werkstattstechnik online 103, 10 (2013) 802 – 806
Tracht, K; Hollmann, T; Wessa, T.; Schneider, D.; Schuh, P.: Consideration of Sustainability in Order Policies for Spare Parts. IEEE, ICRERA - 2 nd International Conference on Renewable Energy Research and Applications, Madrid, Spanien (2013).
Tracht, K.; von der Hagen, F.; Schneider, D.: Applied Repairable-Item Inventory Modeling in the Aviation Industry. Proceedia CIRP, Vol. 11, (2013) 334 - 339
Tracht, K.; Goch, G.; Schuh, P.; Westerkamp, J.F.; Sorg, M.: Failure Probability Prediction based on Condition Monitoring Data of Wind Energy Systems for Spare Parts Supply. In. CIRP - Annals Manufacturing Technology, Vol. 62, Issue 1 (2013) 127–130
Tracht, K; Schuh, P.: Rechnen statt nur horten. Logistik Heute, Jahrgang 35, Heft 9 (2013) 26 - 27
Tracht, K.; Westerholt, J.; Schuh, P.: Spare Parts Planning for Offshore Wind Turbines subject to Restrictive Maintenance Conditions. 46th International Conference on Manufacturing Systems (CMS2013), eds.: P.F. Cunha, K. Ueda, J. Vancza, J.C. Caldeira Portugal (2013) 563 - 568 http://dx.doi.org/10.1016/j.procir.2013.06.033
Tracht, K.; Hogreve, S.; Milczarek, A.M.; Skotartzak, T.; Eilts, T.: Mehrachsige Kraftsensorik in Greiffingern - Vergleich von Gestaltungsans?tzen und Konzept zur Kraftregelung mit Standardgreifern. wt Werkstattstechnik online 103, 9 (2013) 712–716.
Funke, L; Rottler, R; Tracht, K: Rationalisierung in der Herstellung kundenspezifischer Zwischenprodukte, Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF), 108 (2013), Heft 11, 869 - 871
Tracht, K.; Funke, L.: Resource Allocation in the Paced Assembly of Customer Specific Goods. Azevedo, A. (Hrsg.): Advances in Sustainable and Competitive Manufacturing Systems - 23rd International Conference on Flexible Automation and Intelligent Manufacturing. Springer, Heidelberg New York Dordrecht London, 2013, S. 1103-1116.
Tracht, K.; Funke, L.: Ressourcenallokation in der manuellen Montage - Leistungsbestimmung getakteter Montagelinien in der Herstellung gro?volumiger Baugruppen. wt online, 102 (2012), Heft 9, 564-567.
Tracht, K.; Weikert, F.; Hanke, T.: Suitability of the ISO 10303-207 Standard for Product Modeling of Line Linked Micro Parts. Procedia CIRP 3 (2012), 358-363
Tracht, K.; Weikert, F.; Scholz-Reiter, B.; Rippel, D.: Produktdatenmanagement in interdisziplin?ren Forschungsvorhaben. ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb 107, 11 (2012), 836 - 839
Tracht, K.; Weikert, F.:Handling of Micro Parts In: Micro Metal Forming. ed.: F. Vollertsen, Springer-Verlag Berlin Heidelberg (2013) 331-342
Tracht, K.; Weikert, F.; Hanke, T.:Suitability of the ISO 10303-207 Standard for Product Modeling of Line Linked Micro Parts.45th International Conference on Manufacturing Systems (ICMS 12), eds.: G. Chryssolouris, D. Mourtzis Athens (2012) 406 - 413
Tracht, K.; Schneider, D.: Impact of Parameter Estimation Inaccuracies on a Repairable Item System. In: Re-engineering Manufacturing Sustainability. 20th CIRP Conference on Life Cycle Engineering (LCE13), eds: Nee, A.; Song, B.; Ong Springer Heidelberg (2013) 309-313
Tracht, K.; Mederer, M.; Schneider, D.: Impact of Parameter Changes in a Service Provider Closed-Loop Supply Chain with Customer-Owned Stock. In: Leveraging Technology for a Sustainable World.19th CIRP Conference on Life Cycle Engineering (LCE12), eds.: Dornfeld, D., Linke, B. Springer Heidelberg (2012) 593-598
Tracht, K.; Schneider, D.; Schuh, P.: Ersatzteilversorgung hochwertiger Industriegüter.Schriftenreihe Wirtschaft & Logistik - Tagungsband. 29. Logistik-Kongress und EUROLOG (2013) 159 - 184
Tracht, K.; Schuh, P.: Multi Criteria Decision Making for Maintenance Planning of Wind Turbines. 1st International Conference on Through-life Engineering Services (TesConf 12), Shrivenham (2012) 175 - 181
Tracht, K.; Maier, J.; Schuh, P.: Stochastische Einflüsse auf die Instandhaltung von Windenergieanlagen. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb 107, 01/02 (2012) 99 - 103.
Tracht, K.; Niestegge, A.; Schuh, P.: Demand Planning based on Performance Measurement Systems in Closed Loop Supply Chains. In. Procedia CIRP, Vol. 12 (2013) 324 - 329, http://dx.doi.org/10.1016/j.procir.2013.09.056
Tracht, K.; Kuhfuss, B.; Brinksmeier, E.; Busse, M.; Kroll, L.; Hogreve, S.; Garbrecht, M.; Lehmhus, D.; Heinrich, M.; Bosse, S.: Enabling the factories of the future: The role of smart systems in manufacturing and robotics. Smart Systems Integration Conference 2012, Zurich, Switzerland 21-22 March 2012 (SSI 2012) (2012).
Tracht, K.; Hogreve, S.; Bosse, S.: Interpretation of multiaxial gripper force sensors.Technologies and Systems for Assembly Quality, Productivity and Customization - Proceedings of the 4th CIRP Conference on Assembly Technologies and Systems (CATS 2012) ed.: S. Jack Hu. University of Michigan Ann Arbor (2012) 39–42.
Bosse, S.; Hogreve, S.; Tracht, K.: Design of a Mechanical Gripper with an Integrated Smart Sensor Network for Multi-Axial Force Sensing and Perception of Environment. Proceedings of the Smart Systems Integration Conference 2012 (SSI 2012). VDE Verlag Berlin Offenbach (2012).
Tracht, K.; Funke, L.; Zeitzmann, J.: Vorgehen zur Effizienzsteigerung in KMU.Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF), 106 (2011), Heft 3, 153-156.
Tracht, K.; Funke, L.; Joppien, T.: Decentralised Resource Allocation in Paced Assembly Processes. Spath, D.; Ilg, R.; Krause, T. (Eds.): Proceedings of the 21st International Conference on Production Research (ICPR21), Fraunhofer Verlag, Stuttgart, 2011, CD-Rom.
Tracht, K.; Funke, L.: Auftragsorientierte Schichtplanung in der Montage - Optimierung des Personaleinsatzes in der getakteten Flie?montage gro?volumiger Bauteile.wt online, 101 (2011), Heft 9, 591-594.
Kuhfu?, B.; Moumi, E.; Tracht, K.; Weikert, F.; Vollertsen, F.; Stephen, A.: Process Chains In Microforming Technology Using Scaling Effects.14th International ESAFORM Conference on Material Forming (ESAFORM 14), eds.: G. Menary Belfast (2011) 535 – 540.
Tracht, K.; Weikert, F.; Hanke, T.; Kuhfu?, B.; Hellwig, C.: Modellierung von Teileverbunden des Mikroumformens. wt Werkstattstechnik online 101, 11/12 (2011), 765 – 769
Tracht, K.; Weikert, F.; Kuhfu?, B.; Hellwig, C.; Schenck, C.: Technologische und datentechnische Vernetzung von Fertigungseinrichtungen der Mikroumformung.Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499, eds.: O. Kraft, A. Haug, F. Vollertsen, S. Büttgenbach. Karlsruhe (2011) 133 – 138
Tracht, K.; Mederer, M.; Schneider, D.: Source Selection for Spare Parts Supply.44th CIRP International Conference on Manufacturing Systems (ICMS 11), ed. Duffie, N., Madison, WI, USA (2011)
Tracht, K.; Mederer, M.; Schneider, D.: Effects of Lateral Transshipments in Multi-Echelon Closed-Loop Supply Chains. In: Glocalized Solutions for Sustainability in Manufacturing, 18th CIRP International Conference on Life Cycle Engineering (LCE11), ed. Hesselbach, J.; Herrmann, C. Springer Heidelberg (2011) 443-447
Schuh, P.; Tracht, K.; Westerkamp F. J.; Sorg, M.; Bredemeier, C.; Goch, G.: Zustandsorientierte Instandhaltung von Windenergieanlagen.6. VDI-Fachtagung Schwingungsüberwachung VDI Berichte 2151, Leonberg (2011) 33 - 45
Tracht, K.; Kouamo, S. T.: Optimierung der Instandhaltungsplanung von Onshore-Windenergieanlagen.ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb 106, 01/02 (2011) 75 – 79
Tracht, K.; Hogreve, S.; Borchers, F.: Gripper with Integrated Three-Dimensional Force Detection. In:Enabling Manufacturing Competitiveness and Economic Sustainability. Ed.: ElMaraghy, H. A., Springer Heidelberg, Dordrecht, London, New York (2012) 364–369. 10.1007/978-3-642-23860-4_60.
Tracht, K.; Hogreve, S.: Decision Making During Construction and Reconfiguration of Modular Assembly Lines. In: Enabling Manufacturing Competitiveness and Economic Sustainability. Ed.: ElMaraghy, H. A., Springer Heidelberg, Dordrecht, London, New York (2012) 105–110. 10.1007/978-3-642-23860-4_17.
Tracht, K.; Weikert, F.; Funke, L.: Change Management as an Enabler of Employee Knowledge Integration into the Design of Planning Procedures. ElMaraghy, H. A. (Ed.): Enabling Manufacturing Competitiveness and Economic Sustainability, Springer, Heidelberg Dordrecht London New York, 2012, 346-351.
Tracht, K.; Funke, L.; Weikert, F.: Influence of the European Emissions Trading Scheme on MRO Provider of the Civil Aviation Industry.4th International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 11), eds.: H. El Maraghy Montreal (2011) 499 – 504
Tracht, K.; Funke, L.: A Stimulus-Response-Approach for Assembly Line Planning.7'th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (ICME 10), 23.-25. June 2010, Capri, Italy.
Tracht, K.; Schenck, C.; Weikert, F.; Kuhfu?, B.: F?rderung mikrokaltungeformter Bauteile im Verbund.wt Werkstattstechnik online 100, 11/12 (2010) 864 – 868
Tracht, K.; Schuh, P.; Weikert, F.: Seasonal Demand on the Array of Spare Parts in the Aviation Industry. 43th International Conference on Manufacturing Systems (ICMS 10), eds.: G. Sihn; P. Kuhlang Vienna (2010) 1093 – 1100
Tracht, K.; Mederer, M.; Schneider, D.; Queueing of Seasonally Demanded Spare Parts in a Repair Shop of a Closed-Loop Supply Chain. In: Advances in Sustainable Manufacturing, Global Conference on Sustainable Manufacturing (GSCM 10), ed: Seliger, G.; Khraisheh, M.; Jawahir, I.S. Springer Heidelberg (2010) 371-376
Tracht, K.; Schneider, D. ; Schuh, P.: A feedback control system for spare parts logistic networks in the field of civil aviation. 7th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (ICME10), Capri, Italien
Tracht, K.; Wrehde, J.; Seuguep Kouamo, T.: Optimization of the material flow using the principles of the Toyota Production System.43th International Conference on Manufacturing Systems (ICMS 10), eds.: G. Sihn; P. Kuhlang Vienna (2010) 488 – 495
Kuhfu?, B.; Allers, S.; Sch?dlich, S.:Sensor- und Aktorintegration in rotierende Werkzeuge 6. Paderborner Workshop "Entwurf mechatronischer Systeme“, 02./03.04.2009, Paderborn
Kuhfu?, B.; Piwek, V.; Moumi, E.: Manufacturing of micro components by means of plunge rotary swaging 9th International euspen Conference, June 2nd-June 5th, 2009, San Sebastian/Spanien
Kuhfu?, B.; Allers, S.: Sensing tool for condition monitoring 9th International Conference and Exhibition on Laser metrology, machine tool, CMM and robotic performance (LAMDAMAP 2009), 30th June-2nd July 2009, Brunel University, Teddington/UK
Kuhfu?, B.; Piwek, V.; Moumi, E.: Vergleich charakteristischer Einflussgr??en beim Mikro- und Makrorundkneten 4. Kolloquium "Mikroproduktion“, 28.-29.10.2009, Bremen
Kuhfu?, B.; Backe, P. : Development and Mechanical Design of a Mobile Robot-Assisted Gait Rehabilitation System 31th Colloquium of Automation, 5th-6th November 2009, Leer
Kuhfu?, B.; Allers, S.: Autonomic harvesting system for white asparagus: motion mechanism and control 31th Colloquium of Automation, 5th-6th November 2009, Leer
Kuhfu?, B.; Backe, P.: Conception of a mobile processing unit in production engineering 31th Colloquium of Automation, 5th-6th November 2009, Leer
Kuhfu?, B.; Piwek, V.; Kampf, K.; Orlik, T.; Schumacher, W.: Entwicklung einer Hochgeschwindigkeitswickelmaschine und Ans?tze zur weiteren Optimierung SPS/IPC/Drives Elektrische Automatisierung-Systeme und Komponenten- Fachmesse & Kongress, 24.-26.11.2009, Nürnberg
Kuhfu?, B.; Schenck, C.: Einsatzm?glichkeiten von Hybridkinematiken für die Hochgeschwindigkeitsbearbeitung von Gro?bauteilen Buch Fertigungsmaschinen mit Parallelkinematiken- Forschung in Deutschland-, Hrsg. U. Heisel, H. Weule, S. 409-430, Shaker-Verlag, Aachen, ISBN 978-3-8322-7203-6, Juni 2008
Schenck, C.: Einsatz bewegungsredundanter Hybridkinematiken für die Hochgeschwindigkeitsfr?sbearbeitung?Dissertation Dr.-Ing., Universit?t Bremen, April 2008 Shaker-Verlag, Aachen, ISBN 978-3-8322-7475-7
Kuhfu?, B.; Allers, S.: Mechatronic reamer with wireless control 10th euspen International Conference, May 18th-May 22nd, 2008, Zürich, Tagungsband S. 175-178, Hrsg. /Verlag european society for precision engineering and nanotechnology
Kuhfu?, B.; Amirian, G.; Schenck, C.:
Contour Error in Parallel Kinematics Machining by Tracking Error 13th International Conference on Machine Design and Production (UMTIK 2008), September 3rd-5th, 2008, Istanbul, Türkei
Kuhfu?, B.; Allers, S.: Mechatronische Reibahle zur Verschlei?kompensation mit Bluetooth-Interface 10. Wireless Technologies Kongress, 23.-24.09.08, Stuttgart, Tagungsband S. 176-183, Hrsg. Prof. Dr. J. Wollert, Akademische Verlagsgesellschaft Aka GmbH, Heidelberg
Kuhfu?, B.; Moumi, E.: Influence of the Feedrate on Work Quality in Micro Rotary Swaging 3rd International Conference on Micromanufacturing (ICOMM 2008), September
9th - 11th, 2008, Carnegie Mellon/USA, Tagungsband S. 86-91
Kuhfu?, B.; Moumi, E.; Piwek, V.: Micro rotary swaging: process limitations and attempts to their extension Microsystem Technologies online, Springer-Verlag Berlin/Heidelberg, April 2008, ISSN 0946-7076 (Print) 1432-1858 (Online)
Kuhfu?, B.; Schenck, C.; Amirian, G.: Influence of Tracking Error on the Contouring Accuracy in Parallel Kinematics Machining 2nd International Conference on Computing and Solutions in Manufacturing Engineering (CoSME’08), September 25th - 27th 2008, Brasov/Romania
Kuhfu?, B. Maass, P.; Riemer, O.: Mathematical models for surface characterization of machining processesMicrosystem Technologies online, Springer-Verlag Berlin/Heidelberg, August 2008, ISSN 0946-7076 (Print) 1432-1858 (Online)
Kuhfu?, B.; Piwek, V.; Kaupisch, T.; Werschbowski, A.: Bedeutung numerischer Verfahren für die Simulation von Produktionsprozessen Tag des SE 2008, Gesellschaft für Systems Engineering e.V. (GfSE), 13.-14.11.2008, Bremen
Kuhfu?, B.; Orlik, B.; Sch?dlich, S.; Groke, H.:Wavelet basiertes Echtzeitsystem zur ?berwachung von Prozess- und Maschinenzustands?nderungen Tagungsband der SPS/IPC/Drives Elektrische Automatisierung - Systeme und Komponenten - Fachmesse & Kongress, 25.-27.11.2008, Nürnberg, Tagungsband S. 131-139, Hrsg. Verl. A.; Schumacher, W.; Bender, K. VDE-Verlag, Berlin, ISBN 978-3-8007-3128-2
Amirian, G.: Transformation of Tracking Error in Parallel Kinematic Machining Dissertation Dr.-Ing., Universit?t Bremen, November 2008
Kuhfu?, B.; Schenck, C.; Amirian, G. : Contour error in circular trajectory in parallel kinematic machining (PKM) Modern Technologies, Quality and Restructuring (TMCR 2007), Kishinev/Moldawien, May 31st-June 3rd, 2007, Tagungsband S. 21-27
Kuhfu?, B.; Wang, Y. : Pitting Detection with Model-Generated Wavelet Analysis for Condition Monitoring of Linear Guide Ways Modern Technologies, Quality and Restructuring (TMCR 2007), Kishinev/Moldawien, May 31st-June 3rd, 2007, Tagungsband S. 28-33
Kuhfu?, B.; Piwek, V. : Kreuzwickeln unter der Lupe C2 Deutschland Coating & Converting, Ausgabe 2 Februar/M?rz 07, S. 63-65, Verlag nimble shows & media GmbH, Oberaudorf
Kuhfu?, B.; Backe, P. Goch, G.; Kruse, D.: Photothermal inspection of free-form surfaces by high-precision multi-DOF positioning 7th euspen International Conference, May 20th – May 24th, 2007, Bremen, Tagungsband S. 306-309
Kuhfu?, B. Goch, G.; Allers, S.; Stoebener, D.; Dijkman, M.: In-process control of cutting depth during turning SICE Annual Conference 2007, International Conference on Instrumentation, Control and Information Technology, Japan
Kuhfu?, B.; Piwek, V.; Moumi, E.: Mikrorundkneten – Verfahrensgrenzen und Ans?tze zu deren Erweiterung DFG-Kolloquium Mikroproduktion 22.11-23.11.07, Karlsruhe
Kuhfu?, B.; Schenck, C. : Productivity increase in aircraft component machining by hybrid kinematic structures APT'07 International Conference on Applied Production Technology, 17.09.-19.09.07, Bremen
Kuhfu?, B.; Sch?dlich, S.: Layer detection in orbital drilling of composites by advanced process monitoring APT'07 International Conference on Applied Production Technology, 17.09.-19.09.07, Bremen
Kuhfu?, B.; Piwek, V.: Productivity increase of rotary swaging by optimized machine concepts 2nd ICNFT International Conference on New Forming Technology, 20.09.-21.09.07, Bremen
Kuhfu?, B.; Piwek, V.; Allers, S.: Feed drives - Synchronized Motion is leading to a process optimization 52nd IWK-Internationales Wissenschaftliches Kolloquium, Technische Universit?t Ilmenau, 10.09.-13.09.07
Kuhfuss, B.; Amirian, G.; Schenck, C.:Comparison of radial deviation in serial and parallel kinematic machining 3rd Tehran International Conference on Manufacturing Engineering (TICME 2007), December 10-12, 2007, Teheran (Iran)
Kuhfuss, B.; Maass, P.; Riemer, O.: Mathematical models for tribological optimization of machining processes DFG-Kolloquium Mikroproduktion 22.11-23.11.07, Karlsruhe
Kuhfu?, B.; Schenck, C.: Diversion of tool paths in kinematic redundant machining: a general approach for different design requirementsWGP-Annals Production Engineering, Issue XIII/1, 2006, S. 197-202
Kuhfu?, B.; Backe, P. : Automatisierte 3D-Orientierung von Bauteilen mit gekrümmter Oberfl?che zur photothermischen Randzonenuntersuchung13. ITG-/GMA Fachtagung Sensoren und Messsysteme 2006, Freiburg, Tagungsband Seite 185-188
Kuhfu?, B.; Schenck, C.; Allers, S.: Static Calibration of a Tripod by Neural Network Error Identification 5th Parallel Kinematics Seminar, Parallel Kinematic Machines in Research and Practice, Chemnitz, April 25-26, 2006, Tagungsband S. 603-616
Kuhfu?, B.; Backe, P.: Einsatzm?glichkeit einer PI-Parallelkinematik in der industriellen Prüftechnik PI-News, Ausgabe 34, April 2006, Hrsg. Physik-Instrumente GmbH & Co. KG
Kuhfu?, B. : New Technologies and Machine Tool Development in Germany Joint AMT/NCMS Manufacturing Technology Forum, Fort Lauderdale, April 27-28, 2006
Piwek, V. : Verhalten und Optimierung eines direkt angetriebenen Vorschubsystems bei impulsf?rmiger Belastung Dissertation Dr.-Ing., Universit?t Bremen, Dezember 2006, Shaker-Verlag, Aachen, ISBN 978-3-8322-6148-1
Kuhfu?, B.,Piwek, V.: Ma?nahmen und Einrichtung zur Erh?hung der Antriebssteifigkeit bei impulsf?rmiger Belastung. SPS/IPC-Drives Elektrische Automatisierung - Systeme und Komponenten - Fachmesse & Kongress, 22.-24.11.2005, Nürnberg, Tagungsband S. 548-557
Kuhfu?, B., Sch?dlich, S.: Schichterkennung beim Orbitalbohren von Verbundwerkstoffen. wt Werkstattstechnik online 6 (2004), S. 289, Springer-VDI-Verlag
Kuhfu?, B.; Schenck, C.: Estimated Process Time Savings by PKM and HKM Machining.4th Chemnitz Parallel Kinematics Seminar, Development Methods and Application Experience of Parallel Kinematics, Chemnitz, April 20-21, 2004, Tagungsband S. 277-290
Kuhfu?, B.; Schenck, C.: Calculating the Trajectories for Geometric Redundant Machining.1st International Conference on Computing and Solutions in Manufacturing Engineering - CoSME'04, 16.-18. September 2004, Brasov, Romania
Kuhfu?, B., Sch?dlich, S.: Condition Monitoring with Process Adapted Wavelets.1st International Conference on Computing and Solutions in Manufacturing Engineering - CoSME'04, 16.-18. September 2004, Brasov, Romania
Kuhfu?, B.,Piwek, V.: Untersuchungen am Lineardirektantrieb zur Synchronisation der Vorschubbewegung auf die Werkzeugbewegung eines Bearbeitungsprozesses.SPS/IPC-Drives Elektrische Automatisierung - Systeme und Komponenten - Fachmesse & Kongress, 23.-25.11.2004, Nürnberg, Tagungsband S. 541-548
Kuhfu?, B.: Recent Development and Manufacture of Machine Tools in Germany, Keynote paper. 11th International Machine Tool Engineers Conference (IMEC), 03. - 05.11.2004, Tokio/Japan
Sch?dlich, S.: ?ber das Potenzial prozessspezifischer Wavelets in der Prozessanalyse am Beispiel des dynamischen Verhaltens einer hydraulischen Maschinenkomponente. Diplomarbeit Universit?t Bremen FB04/FG05, 2003
Kuhfu?, B.:Studiengang Systems Engineering der Universit?t Bremen - ein neuer interdisziplin?rer Ansatz. Systems Engineering Conference der GfSE, Hamburg 2002
Kuhfu?, B.: Ultradynamische Drehmaschine zur Unrundbearbeitung.SPS/IPC-Drives Elektrische Automatisierung - Systeme und Komponenten - Fachmesse & Kongress, Nürnberg 26.-28.11.2002, Tagungsband S. 650-657
Kuhfu?, B., Schenck, C.: Optimized hybrid machine structures – a new development approach.3rd International Conference of Parallel Kinematics, Chemnitz, April 23-25, 2002, Tagungsband S. 213-226