Non-destructive 3D materials analytics
The 3D X-ray microscopy and microtomography technique, like medical tomography, employs X-rays to inspect the three dimensional distribution of matter inside the object of investigation.
The term “micro” indicates that the resolution achieved is in or below the μm-range. The method is based on the detection and subsequent localisation of the degree of attenuation of the incident X-rays in the sample. The attenuation of X-rays by matter depends on both the chemical elements it consists of as well as the material density. As a result of the reconstruction procedure after the scan, each image consists of voxels (volumetric pixels) and has a certain thickness depending on the detector resolution. Thus, a stack of images contains true volumetric information.
![[Translate to English:] Workflow of sample analysis](/fileadmin/_processed_/9/4/csm_Workflow-sample-analysis_5x2_01_e581d006c4.jpg)
Voxel size and resolution - What does it mean?
In general, voxel size is the actual size of a 3D pixel in your actual volume dataset. This can be changed during image processing. Nominal resolution is the smallest voxel size of a scanner's reconstructed image corresponding to the beam path of the scan.
The final image resolution cannot be better than the voxel size. However, because of other factors such as spot size of the X-ray source, image reconstruction or partial volume effects of particles smaller than the voxel size, resolution is reduced and information is smeared out over neighbouring voxels. Resolution can be 2-5 times of the voxel size.
Detectability refers to the smallest object that still can be seen in an image, depending on high contrast width between object and background. For instance, a gold particle (high attenuation) on a graphite surface (low attenuation) sized even smaller than the resolution of the scanner will still be detectable, while a glass particle (medium attenuation) will not.
Sample size versus voxel size
Very high magnification scans that aim at voxel sizes below 0.5 ?m require the usage of the 20x X-ray objective. This item in turn demands very long beamtimes. Therefore, we recommend the preparation of samples smaller than 1 mm to keep beam times reasonably short. For instance, a detector binning of 1000 voxels aiming at 0.25 ?m resolution will cover a field of view of only 250 microns. All other parts of the sample will not be imaged, but lower transmission severely.
